Datasheet

ManualsBrandsSiemens ManualsDIN-Rail Power SuppliesDIN Rail Power Supply, 24V, 375mA, 9W, Fixed

Data sheet 6EP1731-2BA00

SITOP POWER DC/DC 24 V/0.375 A

SITOP POWER 0.375 A, DC/DC STABILIZED POWER SUPPLY

INPUT: 48-220 V DC OUTPUT: 24 V DC/0.375 A

Input

Input DC voltage

Supply voltage

● at DC

48...220V

Voltage range AC 30...187V

Input voltage

● at DC

30...264V

Wide-range input Yes

Overvoltage resistance -

Mains buffering at Iout rated, min. 10ms; at Vin = 220 V

Input current

● at rated input voltage 48 V

0.3A

● at rated input voltage 220 V

0.06A

Switch-on current limiting (+25 °C), max. 35A

Duration of inrush current limiting at 25 °C

● typical

3ms

I²t, max. 1.2A²·s

6EP1731-2BA00 Subject to change without notice

Page 1/

Show actual product details

Summary of content (4 pages)

PAGE 1
Show actual product details Data sheet 6EP1731-2BA00 SITOP POWER DC/DC 24 V/0.375 A SITOP POWER 0.375 A, DC/DC STABILIZED POWER SUPPLY INPUT: 48-220 V DC OUTPUT: 24 V DC/0.375 A Input Input DC voltage Supply voltage ● at DC Voltage range AC 48 ... 220 V 30 ... 187 V Input voltage ● at DC 30 ... 264 V Wide-range input Yes Overvoltage resistance - Mains buffering at Iout rated, min. 10 ms; at Vin = 220 V Input current ● at rated input voltage 48 V 0.3 A ● at rated input voltage 220 V 0.
PAGE 2
Built-in incoming fuse F 4 A/250 V (not accessible) Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 6 A characteristic C, suitable for DC Output Output Controlled, isolated DC voltage Rated voltage Vout DC 24 V Total tolerance, static ± 3% Static mains compensation, approx. 0.1 % Static load balancing, approx. 0.1 % Residual ripple peak-peak, max. 150 mV Residual ripple peak-peak, typ. 50 mV Spikes peak-peak, max.
PAGE 3
Short-circuit protection Electronic shutdown, automatic restart Enduring short circuit current RMS value ● maximum Overload/short-circuit indicator 0.9 A - Safety Primary/secondary isolation Yes Galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 Protection class Class I Leakage current ● maximum 3.5 mA CE mark Yes UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289, cURus-Recognized (UL 60950, CSA C22.2 No.
PAGE 4
Required spacing ● top 50 mm ● bottom 50 mm ● left 0 mm ● right 0 mm Weight, approx. 0.14 kg Product feature of the enclosure housing for side-byside mounting Yes Installation Snaps onto DIN rail EN 60715 35x7.