Datasheet

Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 10 A characteristic

B or from 6 A characteristic C

Output

Output Controlled, isolated DC voltage

Rated voltage Vout DC 12V

Total tolerance, static ± 3%

Static mains compensation, approx. 0.1%

Static load balancing, approx. 0.1%

Residual ripple peak-peak, max. 200mV

Residual ripple peak-peak, typ. 30mV

Spikes peak-peak, max. (bandwidth: 20 MHz) 300mV

Spikes peak-peak, typ. (bandwidth: 20 MHz) 50mV

Adjustment range 10.5...16.1V

Product function Output voltage adjustable Yes

Output voltage setting via potentiometer

Status display Green LED for output voltage OK

On/off behavior No overshoot of Vout (soft start)

Startup delay, max. 0.5s

Voltage rise, typ. 100ms

Rated current value Iout rated 4.5A

Current range 0...4.5A

● Note

+55 ... +70 °C: Derating 2%/K

Supplied active power typical 54W

Parallel switching for enhanced performance Yes

Numbers of parallel switchable units for enhanced

performance

Efficiency

Efficiency at Vout rated, Iout rated, approx. 87.1%

Power loss at Vout rated, Iout rated, approx. 8W

Power loss [W] during no-load operation maximum 0.3W

Closed-loop control

Dynamic mains compensation (Vin rated ±15 %),

max.

0.2%

Dynamic load smoothing (Iout: 10/90/10 %), Uout ±

typ.

4%

Load step setting time 10 to 90%, typ. 1ms

Load step setting time 90 to 10%, typ. 1ms

Protection and monitoring

Output overvoltage protection Yes, according to EN 60950-1

Current limitation, typ. 5A

Property of the output Short-circuit proof Yes

Short-circuit protection Constant current characteristic

6EP3322-6SB00-0AY0 Subject to change without notice

Page 2/