Datasheet

ManualsBrandsSiemens ManualsDIN-Rail Power SuppliesSITOP PSU3600 DIN Rail Power Supply, Adjustable, 24V, 10A, 120W

Data sheet 6EP3343-0SA00-0AY0

SITOP PSU3600 FLEXI

SITOP PSU3600 flexi Stabilized power supply Input: 120-230 V AC

Output: 3-52 V DC/10 A, 120 W

Input

Input 1-phase AC or DC

Rated voltage value Vin rated 120...230V

Voltage range AC 85...264V

● Note

Derating at < 110 V AC/DC: output power max. 100 W

Supply voltage

● at DC

110...220V

Input voltage

● at DC

88...250V

Wide-range input Yes

Mains buffering With Pa = 120 W and Ue = 230 V AC

Mains buffering at Iout rated, min. 80ms; With Pa = 120 W and Ue = 230 V AC

Rated line frequency 1 50Hz

Rated line frequency 2 60Hz

Rated line range 47...63Hz

Input current

● at rated input voltage 120 V

2.6A

● at rated input voltage 230 V

1.3A

● at rated input voltage 110 V

1.3A

6EP3343-0SA00-0AY0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6EP3343-0SA00-0AY0 SITOP PSU3600 FLEXI SITOP PSU3600 flexi Stabilized power supply Input: 120-230 V AC Output: 3-52 V DC/10 A, 120 W Input Input 1-phase AC or DC Rated voltage value Vin rated 120 ... 230 V Voltage range AC 85 ... 264 V ● Note Derating at < 110 V AC/DC: output power max. 100 W Supply voltage ● at DC 110 ... 220 V Input voltage ● at DC 88 ... 250 V Wide-range input Yes Mains buffering With Pa = 120 W and Ue = 230 V AC Mains buffering at Iout rated, min.
PAGE 2
● at rated input voltage 220 V 0.7 A Switch-on current limiting (+25 °C), max. 35 A I²t, max. 1 A²·s Built-in incoming fuse T 3.15 A (not accessible) Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: 6-10 A characteristic C Output Output Controlled, isolated DC voltage Rated voltage Vout DC 24 V Output voltage 3-52 V DC Total tolerance, static ± 1% Static mains compensation, approx. 0.1 % Static load balancing, approx. 1% Sense line connection max.
PAGE 3
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 5% Setting time maximum 0.2 ms Protection and monitoring Output overvoltage protection ≤ 60 V according to EN 60950-1 Current limitation 2 ... 10 A Current limitation Can be set with potentiometer or analog control voltage signal 0.5 ... 2.5 V Property of the output Short-circuit proof Yes Short-circuit protection Electronic current limiting (2 ... 10 A) in the range 3 ... 12 V or power limiting (120 W) in the range 12 ...
PAGE 4
● Supply input L1, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm² singlecore/finely stranded ● Output +, -: 2 screw terminals each for 0.5 ... 2.5 mm² single-core/finely stranded ● Auxiliary Alarm signals, control inputs: screw-type terminals for 0.14 ... 1.5 mm² single-core/finely stranded Width of the enclosure 42 mm Height of the enclosure 125 mm Depth of the enclosure 125 mm Required spacing ● top 50 mm ● bottom 50 mm ● left 0 mm ● right 0 mm Weight, approx. 0.