Data Sheet

Data sheet 6ES7132-4BD02-0AA0

SIMATIC DP, 5 electronic modules for ET 200S, 4 DO standard 24 V

DC/0.5 A, 15 mm width, 5 units per packing unit

Supply voltage

Reverse voltage protection Yes; when using the same load voltage as on the power module

Load voltage L+

● Rated value (DC)

24V; From power module

● Reverse polarity protection

Yes; polarity reversal can lead to the digital outputs being

connected through

Input current

from load voltage L+ (without load), max. 10mA; Per channel

from backplane bus 3.3 V DC, max. 10mA

Power loss

Power loss, typ. 0.8W

Address area

Address space per module

● Address space per module, max.

1byte

● with packing

4bit

Digital outputs

Type of digital output Source output (PNP, current-sourcing)

6ES7132-4BD02-0AA0 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6ES7132-4BD02-0AA0 SIMATIC DP, 5 electronic modules for ET 200S, 4 DO standard 24 V DC/0.5 A, 15 mm width, 5 units per packing unit Supply voltage Reverse voltage protection Yes; when using the same load voltage as on the power module Load voltage L+ ● Rated value (DC) 24 V; From power module ● Reverse polarity protection Yes; polarity reversal can lead to the digital outputs being connected through Input current from load voltage L+ (without load), max.
PAGE 2
Number of digital outputs 4 Short-circuit protection Yes ● Response threshold, typ. 1 to 1.5 A Limitation of inductive shutdown voltage to L+ (-55 to -60 V) Controlling a digital input Yes Switching capacity of the outputs ● on lamp load, max. 5W Load resistance range ● lower limit 48 Ω ● upper limit 3 400 Ω Output voltage ● for signal "1", min. L+ (-1 V) Output current ● for signal "1" rated value 0.5 A ● for signal "1" permissible range, min.
PAGE 3
Potential separation Potential separation digital outputs ● between the channels No ● between the channels and backplane bus Yes Isolation Isolation tested with 500 V DC Dimensions Width 15 mm Height 81 mm Depth 52 mm Weights Weight, approx.