Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCsPLC output card 6ES7132-6BD20-0DA0

Data sheet 6ES7132-6BD20-0DA0

SIMATIC ET 200SP, digital output module, DQ 4x 24 V DC/2A High

Speed, Pack quantity: 1 unit suitable for BU type A0, Color code

CC00, 3 alternative operating modes: DQ, Oversampling, PWM

Module diagnostics

General information

Product type designation DQ 4x24 V DC/2 A HS

HW functional status From FS05

Firmware version

● FW update possible

Yes

usable BaseUnits BU type A0

Color code for module-specific color identification

plate

CC00

Product function

● I&M data

Yes; I&M0 to I&M3

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

STEP 7 V15.1 or higher

● STEP 7 configurable/integrated as of version

Via GSD as of V5.6 HF4

● PROFIBUS as of GSD version/GSD revision

One GSD file each, Revision 3 and 5 and higher

● PROFINET as of GSD version/GSD revision

GSDML V2.33

Operating mode

● DQ

Yes

● DQ with energy-saving function

Yes; Valve control

6ES7132-6BD20-0DA0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6ES7132-6BD20-0DA0 SIMATIC ET 200SP, digital output module, DQ 4x 24 V DC/2A High Speed, Pack quantity: 1 unit suitable for BU type A0, Color code CC00, 3 alternative operating modes: DQ, Oversampling, PWM Module diagnostics General information Product type designation DQ 4x24 V DC/2 A HS HW functional status From FS05 Firmware version ● FW update possible Yes usable BaseUnits BU type A0 Color code for module-specific color identification plate CC00 Product function ● I&M data Yes; I
PAGE 2
● PWM Yes ● Cam control (switching at comparison values) Yes; Via MtM (module-to-module communication) ● Oversampling Yes ● MSO No Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Input current Current consumption, max. 50 mA; without load Output voltage Rated value (DC) 24 V Power loss Power loss, typ. 2.
PAGE 3
— Number of cams per module, max. 16 — Number of cams per track, max. 16 — Supported axis types Linear axes and rotary axes with modulo function — Hysteresis Yes — Pulsed cam output Yes — Range of values for comparison values, max. -2,147,483,648 to 2,147,483,647 (user-specific within this range) ● Freely usable digital output Yes ● PWM output Yes — Number, max. 4 — Cycle duration, parameterizable Yes; 0 ms, 0.2 ms, 0.4 ms, 0.93 ms, 1.33 ms, 4.27 ms, 10.67 ms, 21.33 ms, 34.13 ms, 59.
PAGE 4
— up to 50 °C, max. 4.7 A; DQ mode — up to 60 °C, max. 2.5 A; DQ mode vertical installation — up to 30 °C, max. 7.2 A; DQ mode — up to 40 °C, max. 5.6 A; DQ mode — up to 50 °C, max. 4 A; DQ mode Cable length ● shielded, max. 50 m ● unshielded, max. 50 m Isochronous mode Isochronous operation (application synchronized up to terminal) Yes; Operating modes DQ and OVS only Execution and activation time (TCO), min. 40 µs Bus cycle time (TDP), min. 125 µs Jitter, max.
PAGE 5
Suitable for safety-related tripping of standard modules No Ambient conditions Ambient temperature during operation ● horizontal installation, min. -30 °C ● horizontal installation, max. 60 °C ● vertical installation, min. -30 °C ● vertical installation, max. 50 °C Altitude during operation relating to sea level ● Installation altitude above sea level, max.