Data Sheet

● PWM
Yes
● Cam control (switching at comparison values)
Yes; Via MtM (module-to-module communication)
● Oversampling
Yes
● MSO
No
Supply voltage
Rated value (DC) 24V
permissible range, lower limit (DC) 19.2V
permissible range, upper limit (DC) 28.8V
Reverse polarity protection Yes
Input current
Current consumption, max. 50mA; without load
Output voltage
Rated value (DC) 24V
Power loss
Power loss, typ. 2.5W; at 24 V, 25 °C, DQ mode, 2 A per channel
Address area
Address space per module
● Inputs
1byte; Max. 14 bytes in the cam control operating mode
● Outputs
1byte; Max. 16 bytes in the oversampling operating mode
Hardware configuration
Automatic encoding Yes
● Mechanical coding element
Yes
Selection of BaseUnit for connection variants
● 1-wire connection
BU type A0
● 2-wire connection
BU type A0
● 3-wire connection
BU type A0 with AUX terminals or potential distributor module
● 4-wire connection
BU type A0 + Potential isolation module
Digital outputs
Type of digital output Source output (PNP, current-sourcing)
Number of digital outputs 4
Current-sinking No
Current-sourcing Yes; Push-pull output
Digital outputs, parameterizable Yes
Short-circuit protection Yes
● Response threshold, typ.
6A
Limitation of inductive shutdown voltage to M (-1 V)
Controlling a digital input No
Digital output functions, parameterizable
● Switching tripped by comparison values
Yes
— Number of cam tracks, max.
4
6ES7132-6BD20-0DA0 Subject to change without notice
Page 2/
5
09/13/2019 © Copyright Siemens