Data Sheet

Diagnostic messages
● Monitoring the supply voltage
Yes
● Wire-break
Yes; Module-wise
● Short-circuit to M
Yes; Module-wise
● Short-circuit to L+
Yes; Module-wise
● Group error
Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED)
Yes; Green PWR LED
● Channel status display
Yes; Green LED
● for channel diagnostics
No
● for module diagnostics
Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels
No
● between the channels and backplane bus
Yes
● between the channels and the power supply of
the electronics
No
Isolation
Isolation tested with 707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions No
Suitable for safety-related tripping of standard
modules
Yes; From FS03
Highest safety class achievable in safety mode
● Performance level according to ISO 13849-1
PL d
● SIL acc. to IEC 61508
SIL 2
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.
0°C
● horizontal installation, max.
60°C
● vertical installation, min.
0°C; in all other mounting positions
● vertical installation, max.
50°C; in all other mounting positions
Altitude during operation relating to sea level
● Ambient air temperature-barometric pressure-
altitude
On request: Negative ambient temperature down to -30 °C
(without condensation), installation altitudes between 2 000 m and
5 000 m
Dimensions
Width 15mm
Height 73mm
Depth 58mm
6ES7132-6BH00-0BA0 Subject to change without notice
Page 4/
5
09/16/2019 © Copyright Siemens