Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCsPLC add-on module 6ES7132-6HD01-0BB1

Data sheet 6ES7132-6HD01-0BB1

SIMATIC ET 200SP, Relay module, RQ NO 4x 120V

DC..230VAC/5A ST. 4 normally open contacts, isolated contacts,

packing unit: 1 piece, fits to BU-type B0 and B1, Colour Code CC40,

substitute value output, module diagnostics for: supply voltage

General information

Product type designation RQ 4x120 VDC ... 230 VAC/5 A NO ST

HW functional status From FS02

Firmware version V0.0

● FW update possible

usable BaseUnits BU type B0, B1

Color code for module-specific color identification

plate

CC40

Product function

● I&M data

Yes; I&M0 to I&M3

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V14

● STEP 7 configurable/integrated as of version

V5.5 SP3

● PCS 7 configurable/integrated as of version

V8.1 SP1

● PROFIBUS as of GSD version/GSD revision

One GSD file each, Revision 3 and 5 and higher

● PROFINET as of GSD version/GSD revision

GSDML V2.3

Operating mode

● DQ

Yes

6ES7132-6HD01-0BB1 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6ES7132-6HD01-0BB1 SIMATIC ET 200SP, Relay module, RQ NO 4x 120V DC..230VAC/5A ST. 4 normally open contacts, isolated contacts, packing unit: 1 piece, fits to BU-type B0 and B1, Colour Code CC40, substitute value output, module diagnostics for: supply voltage General information Product type designation RQ 4x120 VDC ... 230 VAC/5 A NO ST HW functional status From FS02 Firmware version V0.
PAGE 2
● DQ with energy-saving function No ● PWM No ● Oversampling No ● MSO No Redundancy ● Redundancy capability Yes Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Input current Current consumption (rated value) 55 mA; without load Output voltage Rated value (AC) 230 V Power loss Power loss, typ. 1.
PAGE 3
● Current per channel, max. 5A ● Current per module, max. 20 A Total current of the outputs (per module) horizontal installation — up to 50 °C, max. 20 A — up to 60 °C, max. 16 A vertical installation — up to 40 °C, max. 20 A — up to 50 °C, max. 16 A Relay outputs ● Number of relay outputs 4 ● Rated supply voltage of relay coil L+ (DC) 24 V ● Current consumption of relays (coil current of all relays), max. 40 mA ● external protection for relay outputs Yes, with miniature fuse max.
PAGE 4
● Channel status display Yes; Green LED ● for channel diagnostics No ● for module diagnostics Yes; green/red DIAG LED Potential separation Potential separation channels ● between the channels Yes ● between the channels and backplane bus Yes ● between the channels and the power supply of the electronics Yes Permissible potential difference between channels and backplane bus/supply voltage 240 V AC Isolation Isolation tested with 2 500 V DC (type test) tested with ● between channels and backpl