Brochure

Simple to use
Easy station assembly
Time saving from easy station setup and replacing modules as well as the terminal boxes
during operation. The maximum configuration comprises 64 modules, i.e. 64x16 signals –
on a width of only one meter. The mechanical coding of I/O modules with the base unit
prevents module confusion during assembly. This ensures the prevention of faults.
Rapid wiring
The new arrangement and the push-in terminal make wiring and cable removal as easy
as never before. Except for a screwdriver, no tools are required for the cables’ wiring and
removal. The connections are gas-tight and thus corrosion-resistant.
Reliable diagnostics
SIMATIC ET 200SP continuously provides the user with detailed information on the system
state via channel-accurate signal transfer on the I/O module. User do not need additional
programming or bit deciphering for I/O module and channel diagnostics. Diagnostics are
continusly available even during CPU stop when SIMATIC ET 200SP is controlled with
S7-1500 CPU.
Smaller in size
Effective footprint
SIMATIC ET 200SP features a size smaller by roughly 50 % compared to other distributed
I/Os. With a height of approx. 115 millimeters, the system offers space for 16 channels
with single-conductor connection (without AUX terminals). With 3-conductor connection
with AUX terminals, the height amounts to 140 millimeters for 8 channels. The depth is
approx. 75 millimeters. Leaving sufficient distance to the control cabinet door, SIMATIC
ET 200SP complies with the standardized bending radii in control cabinets with a depth
of 80 millimeters.
Integrated power module
To keep the size as small as possible, the power module for load group formation is
integrated in the system with SIMATIC ET 200SP.
Maximum transparency
Despite the system’s compactness, the I/O modules allow for very transparent labeling. An
innovative labeling system combines the most important information regarding module,
wiring and channels.
SIMATIC ET 200SP
2