Brochure

Stronger in performance

Communication with PROFINET and PROFIBUS

High-performance automation solutions with distributed I/Os are only made possible

through industrial communication. PROFINET represents the powerful Ethernet standard

with minimum cycle times for automation. The isochronous mode of the SIMATIC ET

200SP backplane bus supports low-jitter data transfer – and thus allows for maximum

precision. The interface module of SIMATIC ET 200SP is also available for connection

to PROFIBUS.

Hot swapping

SIMATIC ET 200SP also facilitates hot swapping with multiple modules (multi hot

swapping). This means that multiple modules can be simultaneously removed and

replaced during ongoing operation. As a result, only affected modules fail instead of

the entire station. This ensures reduced downtimes and increased productivity as the

unaffected system components of SIMATIC ET 200SP remain in operation.

Safety Integrated

SIMATIC ET 200SP supports safety-related communication. The safety DI and DO modules

are equivalent in size to the standard modules. Their functional safety is certified in accor-

dance with EN 61508. They are rated for safety-related applications up to SIL3 in accor-

dance with EN 62061 and PL e in accordance with ISO 13849. As a special highlight of

SIMATIC ET 200SP fail-safe modules, the fail-safe addresses are assigned via engineering

during commissioning. This simplifies the setup process and saves time.

New highlights

SIMATIC ET 200SP Controllers: CPU 1510SP-1PN and CPU 1512SP-1PN

SIMATIC ET 200SP CPUs with PROFINET feature the same functionalities as the S7-1511 /

S7-1513 CPUs, e.g. integrated trace function, web server and fully symbolic programming.

These CPUs come with 3 integrated Ethernet ports, 2 Ethernet connection ports can be

flexibly selected by means of bus adapters as a cost saving feature. These CPUs can also

be configured as interface modules with the iDevice functionality.

PRONETA

PRONETA ensures eased commissioning and configuration of your PROFINET network.

Your network’s topology is automatically read in. You can either change the address

parameters of your SIMATIC ET 200SP station manually or use the parameters of a

template. I/O modules can be parameterized, controlled and monitored with the help

of PRONETA. The test results are logged in a clearly structured protocol.

www.siemens.com/proneta

TIA Selection Tool

The TIA Selection Tool offers assistants for the selection of desired devices and networks.

Moreover, it provides configurators for the selection of modules and accessories as well

as for the verification of correct operability. The TIA Selection Tool generates a complete

order list on the basis of your product selection or product configuration.