Data Sheet

Data sheet 6ES7134-4GB52-0AB0

SIMATIC DP, Electronics module ET200S: 2AI High Speed I-2-wire

0-20 mA; 4.. 20mA, 15 bit, 15 mm width, for 2-wire transducer Cycle

time of module: 0.1 ms, with SF LED (group fault)

Supply voltage

Load voltage L+

● Rated value (DC)

24V

● Short-circuit protection

Yes

● Reverse polarity protection

Yes

Input current

from load voltage L+ (without load), max. 225mA

from backplane bus 3.3 V DC, max. 10mA

Output voltage

Power supply to the transmitters

● present

Yes

● short-circuit proof

Yes

Power loss

Power loss, typ. 2.5W

Address area

6ES7134-4GB52-0AB0 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6ES7134-4GB52-0AB0 SIMATIC DP, Electronics module ET200S: 2AI High Speed I-2-wire 0-20 mA; 4.. 20mA, 15 bit, 15 mm width, for 2-wire transducer Cycle time of module: 0.1 ms, with SF LED (group fault) Supply voltage Load voltage L+ ● Rated value (DC) 24 V ● Short-circuit protection Yes ● Reverse polarity protection Yes Input current from load voltage L+ (without load), max. 225 mA from backplane bus 3.3 V DC, max.
PAGE 2
Address space per module ● Address space per module, max. 4 byte Analog inputs Number of analog inputs 2 Cycle time (all channels) max. 0.25 ms Input ranges (rated values), currents ● 0 to 20 mA Yes ● Input resistance (0 to 20 mA) 106 Ω ● 4 mA to 20 mA Yes Cable length ● shielded, max. 200 m Analog value generation for the inputs Integration and conversion time/resolution per channel ● Resolution with overrange (bit including sign), max.
PAGE 3
Diagnostic messages ● Wire-break Yes; at 4 to 20 mA ● Group error Yes ● Overflow/underflow Yes Diagnostics indication LED ● Group error SF (red) Yes Parameter Diagnostics wire break At 4 to 20 mA Measurement type/range 4 to 20 mA, 0 to 20 mA Group diagnostics 1 Overflow/underflow 1 Potential separation Potential separation analog inputs ● between the channels No ● between the channels and backplane bus Yes ● Between the channels and load voltage L+ Yes Permissible potential difference