Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7134-4JB51-0AB0 PLC electronics board

Data sheet 6ES7134-4JB51-0AB0

SIMATIC DP, Electronics module for ET 200S, 2/4 AI RTD Standard,

15 mm width, 15 bit+sign Pt100 STD; Pt100 KL; NI100 STD; NI100

KL; 150 ohm; 300 ohm; 600 ohm; Cycle time 110 ms/channel with

SF LED (group fault)

Supply voltage

Load voltage L+

● Rated value (DC)

24V; From power module

● Reverse polarity protection

Yes

Input current

from load voltage L+ (without load), max. 30mA

from backplane bus 3.3 V DC, max. 10mA

Output voltage

Power supply to the transmitters

● present

Yes

● short-circuit proof

Yes

Power loss

Power loss, typ. 0.6W

Address area

Address space per module

● Address space per module, max.

8byte

Analog inputs

6ES7134-4JB51-0AB0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6ES7134-4JB51-0AB0 SIMATIC DP, Electronics module for ET 200S, 2/4 AI RTD Standard, 15 mm width, 15 bit+sign Pt100 STD; Pt100 KL; NI100 STD; NI100 KL; 150 ohm; 300 ohm; 600 ohm; Cycle time 110 ms/channel with SF LED (group fault) Supply voltage Load voltage L+ ● Rated value (DC) 24 V; From power module ● Reverse polarity protection Yes Input current from load voltage L+ (without load), max. 30 mA from backplane bus 3.3 V DC, max.
PAGE 2
Number of analog inputs 4; 2 for 3 or 4-wire connection permissible input voltage for voltage input (destruction limit), max. 9V Constant measurement current for resistance-type transmitter, typ. 1.67 mA Cycle time (all channels) max.
PAGE 3
Encoder Connection of signal encoders ● for resistance measurement with two-wire connection Yes ● for resistance measurement with three-wire connection Yes ● for resistance measurement with four-wire connection Yes Errors/accuracies Linearity error (relative to input range), (+/-) 0.01 % Temperature error (relative to input range), (+/-) 0.005 %/K Crosstalk between the inputs, min. -50 dB Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) 0.
PAGE 4
Potential separation analog inputs ● between the channels No ● between the channels and backplane bus Yes ● Between the channels and load voltage L+ Yes Permissible potential difference between MANA and M internally (UISO) 75 V DC/60 V AC Isolation Isolation tested with 500 V DC Dimensions Width 15 mm Height 81 mm Depth 52 mm Weights Weight, approx.