Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7135-6FB00-0BA1 PLC output module

Data sheet 6ES7135-6FB00-0BA1

SIMATIC ET 200SP, Analog output module, AQ 2xU Standard, Pack

quantity: 1 unit, suitable for BU type A0, A1, Color code CC00,

Module diagnostics, 16 bit

General information

Product type designation AQ 2xU ST

HW functional status From FS03

Firmware version

● FW update possible

Yes

usable BaseUnits BU type A0, A1

Color code for module-specific color identification

plate

CC00

Product function

● I&M data

Yes; I&M0 to I&M3

● Output range scalable

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V13 SP1 / -

● STEP 7 configurable/integrated as of version

V5.5 SP3 / -

● PROFIBUS as of GSD version/GSD revision

GSD Revision 5

● PROFINET as of GSD version/GSD revision

GSDML V2.3

Operating mode

● Oversampling

6ES7135-6FB00-0BA1 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6ES7135-6FB00-0BA1 SIMATIC ET 200SP, Analog output module, AQ 2xU Standard, Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit General information Product type designation AQ 2xU ST HW functional status From FS03 Firmware version ● FW update possible Yes usable BaseUnits BU type A0, A1 Color code for module-specific color identification plate CC00 Product function ● I&M data Yes; I&M0 to I&M3 ● Output range scalable No Engineering with
PAGE 2
● MSO No CiR – Configuration in RUN Reparameterization possible in RUN Yes Calibration possible in RUN No Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Input current Current consumption, max. 80 mA Power loss Power loss, typ. 1W Address area Address space per module ● Address space per module, max.
PAGE 3
Settling time ● for resistive load 0.1 ms ● for capacitive load 1 ms Errors/accuracies Linearity error (relative to output range), (+/-) 0.03 % Temperature error (relative to output range), (+/-) 0.005 %/K Crosstalk between the outputs, min. -50 dB Repeat accuracy in steady state at 25 °C (relative to output range), (+/-) 0.05 % Operational error limit in overall temperature range ● Voltage, relative to output range, (+/-) 0.5 % ● Current, relative to output range, (+/-) 0.
PAGE 4
Ambient conditions Ambient temperature during operation ● horizontal installation, min. -30 °C ● horizontal installation, max. 60 °C ● vertical installation, min. -30 °C ● vertical installation, max. 50 °C Altitude during operation relating to sea level ● Installation altitude above sea level, max. 2 000 m; On request: Installation altitudes greater than 2 000 m Dimensions Width 15 mm Height 73 mm Depth 58 mm Weights Weight, approx.