Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7135-6HD00-0BA1 PLC output module

Data sheet 6ES7135-6HD00-0BA1

SIMATIC ET 200SP, Analog output module, AQ 4XU/I Standard,

suitable for BU type A0, A1, Color code CC00, Module diagnostics,

16 bit, +/-0.3%

General information

Product type designation AQ 4xU/I ST

HW functional status From FS07

usable BaseUnits BU type A0, A1

Color code for module-specific color identification

plate

CC00

Product function

● I&M data

Yes; I&M0 to I&M3

● Output range scalable

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V11 SP2 / V13

● STEP 7 configurable/integrated as of version

V5.5 SP3 / -

● PCS 7 configurable/integrated as of version

V8.1 SP1

● PROFIBUS as of GSD version/GSD revision

One GSD file each, Revision 3 and 5 and higher

● PROFINET as of GSD version/GSD revision

GSDML V2.3

Operating mode

● Oversampling

● MSO

6ES7135-6HD00-0BA1 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6ES7135-6HD00-0BA1 SIMATIC ET 200SP, Analog output module, AQ 4XU/I Standard, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit, +/-0.
PAGE 2
CiR – Configuration in RUN Reparameterization possible in RUN Yes Calibration possible in RUN No Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Input current Current consumption, max. 150 mA Power loss Power loss, typ. 1.5 W Address area Address space per module ● Address space per module, max.
PAGE 3
Cable length ● shielded, max. 1 000 m; 200 m for voltage output Analog value generation for the outputs Integration and conversion time/resolution per channel ● Resolution with overrange (bit including sign), max. 16 bit Settling time ● for resistive load 0.1 ms ● for capacitive load 1 ms ● for inductive load 0.5 ms Errors/accuracies Linearity error (relative to output range), (+/-) 0.03 % Temperature error (relative to output range), (+/-) 0.005 %/K Crosstalk between the outputs, min.
PAGE 4
Potential separation Potential separation channels ● between the channels No ● between the channels and backplane bus Yes ● between the channels and the power supply of the electronics Yes Isolation Isolation tested with 707 V DC (type test) Ambient conditions Ambient temperature during operation ● horizontal installation, min. -30 °C ● horizontal installation, max. 60 °C; Observe derating ● vertical installation, min. -30 °C ● vertical installation, max.