Brochure

SIMATIC ET 200MP30

Standardized pinning

Modules of the same type have standardized pinning and are

therefore wired the same way. This reduces the risk of errors

and also enables the wiring to be performed reliably by less

experienced personnel.

Potential groups

Potential groups are easily formed by inserting jumpers in the

front connector instead of wiring. This means that potential

groups are more easily recognized and can be changed very

easily.

Cable space expands with system

ET 200MP has a cable storage space that expands with the sys-

tem and the front doors have two latching positions. This sim-

plifies the wiring, particularly when cables with a large core

cross-section and/or thick insulation are used.

Integrated shielding

The integrated shielding concept for analog modules makes

the system more robust and more resistant to electromagnetic

interference, thereby increasing plant availability.

Labeling concept

On the front, the modules have a small area available for

equipment identification. Normal commercial labeling sys-

tems can be used for this. This enables modules to be identi-

fied more quickly and easily.

The LEDs are assigned to the terminal and labeling on a 1:1

basis. This enables the wiring to be checked quickly and easily

and ensures that the channel status is clearly readable. In the

event of a fault, e.g. wire break on a channel, the correspond-

ing LED lights up red. The fault can therefore be located quick-

ly and precisely and then corrected. This reduces plant down-

times to a minimum.

SIMATIC_ET200_ENGLISCH.book Seite 30 Montag, 26. November 2012 10:02 10