Brochure

SIMATIC ET 200pro44

Interface modules for PROFIBUS

The interface modules (IMs) for PROFIBUS can be combined

with three different modules for connecting the bus and pow-

er supply.

All connection modules for PROFIBUS have visible address

setters that allow the addresses to be easily read as well as a

selectable terminating resistor. The integrated T functionality

supports the start-up of partial segments and uninterrupted

bus communication in the event of a servicing requirement.

• Direct connection with cable gland: For up to 16 A elec-

tronic load and a cross-section of up to 2.5 mm².

• ECOFAST (Energy and Communication Field Installation

System) – The standardized Siemens connection technique

for cabinet-free distribution is based on hybrid cables for

bus signals and power supply.

• M12, 7/8'': The familiar connection method with widely im-

plemented connector standard.

Interface modules IM 154-1 DP

IM 154-2 DP HF

Protocol PROFIBUS DP

Transfer rate, max. 12 Mbit/s

Firmware update via PROFIBUS

Dimensions (with connection

module)

90 x 130 x 173 mm

With CM IP DP M12, 7/8"

90 x 130 x 120 mm

With CM IP DP directly

90 x 130 x 80 mm

With CM IP DP ECOFAST

Order No. group 6ES7 154-1.

6ES7 154-2.

PROFIBUS IM with

M12, 7/8" connection

PROFIBUS IM

with direct connection

PROFIBUS IM

with ECOFAST connection

SIMATIC_ET200_ENGLISCH.book Seite 44 Montag, 26. November 2012 10:02 10