Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7138-6AA00-0BA0 PLC main module

Data sheet 6ES7138-6AA00-0BA0

SIMATIC ET 200SP, TM count 1x 24V Counter module, 1 channel

for 24 V incremental or encoder, 3 DI, 2 DQ

General information

Product type designation TM Count 1x24V

Firmware version V1.3

● FW update possible

Yes

usable BaseUnits BU type A0

Product function

● I&M data

Yes; I&M0 to I&M3

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V13 (FW V1.0), V14 (V1.2), V15 (FW V1.3) / V13 (FW V1.0), V14

SP1 (V1.2)

● STEP 7 configurable/integrated as of version

As of V5.5 SP3, only up to FW V1.2

● PROFIBUS as of GSD version/GSD revision

GSD Revision 5

● PROFINET as of GSD version/GSD revision

GSDML V2.3

Supply voltage

Load voltage L+

● Rated value (DC)

24V

● permissible range, lower limit (DC)

19.2V

● permissible range, upper limit (DC)

28.8V

6ES7138-6AA00-0BA0 Subject to change without notice

Page 1/

Summary of content (6 pages)

PAGE 1
Data sheet 6ES7138-6AA00-0BA0 SIMATIC ET 200SP, TM count 1x 24V Counter module, 1 channel for 24 V incremental or encoder, 3 DI, 2 DQ General information Product type designation TM Count 1x24V Firmware version V1.3 ● FW update possible usable BaseUnits Yes BU type A0 Product function ● I&M data Yes; I&M0 to I&M3 Engineering with ● STEP 7 TIA Portal configurable/integrated as of version V13 (FW V1.0), V14 (V1.2), V15 (FW V1.3) / V13 (FW V1.0), V14 SP1 (V1.
PAGE 2
● Reverse polarity protection Yes Input current Current consumption, max. 60 mA; without load Encoder supply Number of outputs 1 24 V encoder supply ● 24 V Yes; L+ (-0.8 V) ● Short-circuit protection Yes; electronic/thermal ● Output current, max. 300 mA Power loss Power loss, typ.
PAGE 3
Cable length ● shielded, max. 1 000 m ● unshielded, max. 600 m Digital outputs Type of digital output Transistor Number of digital outputs 2 Short-circuit protection Yes; electronic/thermal ● Response threshold, typ. 1A Limitation of inductive shutdown voltage to L+ (-33 V) Controlling a digital input Yes Digital output functions, parameterizable ● Switching tripped by comparison values Yes ● Freely usable digital output Yes Switching capacity of the outputs ● with resistive load, max.
PAGE 4
— permissible quiescent current (2-wire sensor), max. 1.5 mA Encoder signals, incremental encoder (asymmetrical) ● Input voltage 24 V ● Input frequency, max. 200 kHz ● Counting frequency, max. 800 kHz; with quadruple evaluation ● Cable length, shielded, max. 600 m; depending on input frequency, encoder and cable quality; max.
PAGE 5
● Status indicator backward counting (green) Yes ● Status indicator forward counting (green) Yes Integrated Functions Number of counters 1 Counting frequency (counter) max. 800 kHz; with quadruple evaluation Fast mode Yes; FW V1.
PAGE 6
Ambient conditions Ambient temperature during operation ● horizontal installation, min. -30 °C ● horizontal installation, max. 60 °C ● vertical installation, min. -30 °C ● vertical installation, max. 50 °C Decentralized operation to SIMATIC S7-300 Yes to SIMATIC S7-400 Yes to SIMATIC S7-1200 Yes to SIMATIC S7-1500 Yes to standard PROFIBUS master Yes to standard PROFINET controller Yes Dimensions Width 15 mm Height 73 mm Depth 58 mm Weights Weight, approx.