Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7138-6CG00-0BA0 PLC add-on module

Data sheet 6ES7138-6CG00-0BA0

SIMATIC ET 200SP, TM timer DIDQ 10x 24V time-controlled digital

inputs and outputs 4 DI, 6DQ with time stamp Count, PWM,

oversampling

General information

Product type designation TM Timer DIDQ 10x24V

usable BaseUnits BU type A0

Product function

● I&M data

Yes; I&M 0

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V13 Update 3

● STEP 7 configurable/integrated as of version

V5.5 SP3 / -

Supply voltage

Load voltage L+

● Rated value (DC)

24V

● permissible range, lower limit (DC)

19.2V

● permissible range, upper limit (DC)

28.8V

● Reverse polarity protection

Yes; against destruction

Input current

Current consumption, max. 50mA; without load

Encoder supply

6ES7138-6CG00-0BA0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6ES7138-6CG00-0BA0 SIMATIC ET 200SP, TM timer DIDQ 10x 24V time-controlled digital inputs and outputs 4 DI, 6DQ with time stamp Count, PWM, oversampling General information Product type designation TM Timer DIDQ 10x24V usable BaseUnits BU type A0 Product function ● I&M data Yes; I&M 0 Engineering with ● STEP 7 TIA Portal configurable/integrated as of version V13 Update 3 ● STEP 7 configurable/integrated as of version V5.
PAGE 2
Number of outputs 1 24 V encoder supply ● 24 V Yes; L+ (-0.8 V) ● Short-circuit protection Yes ● Output current, max. 500 mA; Observe derating Power loss Power loss, typ. 1.5 W Address area Address space per module ● Inputs 26 byte ● Outputs 32 byte Digital inputs Number of digital inputs 4 Digital inputs, parameterizable Yes Input characteristic curve in accordance with IEC 61131, type 3 Yes Digital input functions, parameterizable ● Digital input with time stamp — Number, max.
PAGE 3
— parameterizable Yes; none / 0.05 / 0.1 / 0.4 / 0.8 ms — at "0" to "1", min. 4 µs — at "1" to "0", min. 4 µs Cable length ● shielded, max. 1 000 m; Depending on sensor, cable quality and rate of change ● unshielded, max.
PAGE 4
● on lamp load, max. 10 Hz Total current of the outputs ● Current per module, max. 3.5 A; Observe derating Cable length ● shielded, max. 1 000 m; Depending on load and cable quality ● unshielded, max. 600 m; Depending on load and cable quality Encoder Connectable encoders ● Incremental encoder (asymmetrical) Yes ● 24 V initiator Yes ● 2-wire sensor Yes — permissible quiescent current (2-wire sensor), max. 1.
PAGE 5
● Monitoring of the supply voltage (PWR-LED) Yes; Green PWR LED ● Channel status display Yes ● for module diagnostics Yes; green/red DIAG LED Integrated Functions Number of counters 3 Counting frequency (counter) max.