Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7138-6DB00-0BB1 PLC digital ouput module

Data sheet 6ES7138-6DB00-0BB1

SIMATIC ET 200SP, TM Pulse 2x24V PWM and pulse output 2

channels 2 A for proportional valves and DC motors

General information

Product type designation TM Pulse 2x24 V

Firmware version V1.0

● FW update possible

Yes

usable BaseUnits BU type B1

Color code for module-specific color identification

plate

CC40

Product function

● I&M data

Yes; I&M 0

● Isochronous mode

Yes

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V13 SP1 + HSP

● STEP 7 configurable/integrated as of version

V5.5 SP4 and higher

● PROFIBUS as of GSD version/GSD revision

GSD Revision 5

● PROFINET as of GSD version/GSD revision

GSDML V2.31

Supply voltage

Load voltage L+

6ES7138-6DB00-0BB1 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6ES7138-6DB00-0BB1 SIMATIC ET 200SP, TM Pulse 2x24V PWM and pulse output 2 channels 2 A for proportional valves and DC motors General information Product type designation TM Pulse 2x24 V Firmware version V1.
PAGE 2
● Rated value (DC) 24 V ● permissible range, lower limit (DC) 19.2 V ● permissible range, upper limit (DC) 28.8 V ● Short-circuit protection Yes ● Reverse polarity protection Yes; against destruction Input current Current consumption, max. 70 mA; without load Encoder supply Number of outputs 2; A common 24V encoder supply for both channels 24 V encoder supply ● 24 V Yes; L+ (-0.8 V) ● Short-circuit protection Yes; per module, electronic ● Output current, max.
PAGE 3
— at "1" to "0", min. 4 µs; for parameterization "none" Digital outputs Type of digital output P- and M-switching Number of digital outputs 2; 1 per channel Current-sinking Yes Current-sourcing Yes Short-circuit protection Yes; electronic/thermal ● Response threshold, typ. 6.8 A with Standard output, 2 A with High Speed output Limitation of inductive shutdown voltage to -0.8 V Controlling a digital input Yes Accuracy of pulse duration ±100 ppm ±0.
PAGE 4
● for signal "1", min. 23.2 V; L+ (-0.8 V) Output current ● for signal "1" rated value 2 A; 0.1 A with High Speed output, observe derating Output delay with resistive load ● "0" to "1", typ. 0 µs; With High Speed output, 4.5 µs with Standard output ● "0" to "1", max. 0.8 µs; With High Speed output, 9 µs with Standard output ● "1" to "0", typ. 0 µs; With High Speed output, 4.5 µs with Standard output ● "1" to "0", max. 0.
PAGE 5
Isolation tested with 707 V DC (type test) Ambient conditions Ambient temperature during operation ● horizontal installation, min. -30 °C ● horizontal installation, max. 60 °C; Observe derating ● vertical installation, min. -30 °C ● vertical installation, max. 50 °C; Observe derating Altitude during operation relating to sea level ● Installation altitude above sea level, max.