Data Sheet

Data sheet 6ES7142-4BD00-0AA0

SIMATIC DP, electronic module for ET 200 PRO, 4 DO 24 V DC,

2.0A; Module diagnostics; incl. bus module, Connection module IO

6ES7194-4..00-0AA0 order separately

Supply voltage

Load voltage 2L+

● Rated value (DC)

24V

● Short-circuit protection

Yes; per channel, electronic

● Reverse polarity protection

Yes; against destruction; load increasing

Input current

from load voltage 2L+ (without load), max. 20mA

from backplane bus 3.3 V DC, max. 20mA

Power loss

Power loss, typ. 2W

Address area

Address space per module

● Address space per module, max.

1byte

Digital outputs

Number of digital outputs 4

Short-circuit protection Yes

● Response threshold, typ.

2.8A

6ES7142-4BD00-0AA0 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6ES7142-4BD00-0AA0 SIMATIC DP, electronic module for ET 200 PRO, 4 DO 24 V DC, 2.0A; Module diagnostics; incl. bus module, Connection module IO 6ES7194-4..00-0AA0 order separately Supply voltage Load voltage 2L+ ● Rated value (DC) 24 V ● Short-circuit protection Yes; per channel, electronic ● Reverse polarity protection Yes; against destruction; load increasing Input current from load voltage 2L+ (without load), max. 20 mA from backplane bus 3.3 V DC, max.
PAGE 2
Limitation of inductive shutdown voltage to 2L+ (-47 V) Controlling a digital input Yes Switching capacity of the outputs ● on lamp load, max. 10 W Load resistance range ● lower limit 12 Ω ● upper limit 4 kΩ Output voltage ● for signal "1", min. 2L+ (-0,8 V) Output current ● for signal "1" rated value 2A ● for signal "0" residual current, max. 0.5 mA Parallel switching of two outputs ● for uprating No ● for redundant control of a load Yes Switching frequency ● with resistive load, max.
PAGE 3
Isolation Isolation tested with 707 V DC (type test) Standards, approvals, certificates Suitable for safety-related tripping of standard modules Yes Highest safety class achievable for safety-related tripping of standard modules ● Performance level according to ISO 13849-1 PL d ● Category according to ISO 13849-1 Cat. 3 ● SILCL according to IEC 62061 SILCL 2 Dimensions Width 45 mm Height 130 mm Depth 35 mm Weights Weight, approx.