Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCsPLC add-on module 6ES7143-5AF00-0BA0

Data sheet 6ES7143-5AF00-0BA0

SIMATIC ET 200AL, DIQ 4+DQ 4x 24 V DC/0.5 A, 4x M12, Degree

of protection IP67

General information

Product type designation DIQ 4+DQ 4x24VDC/0.5A

HW functional status E01

Firmware version V1.0.x

Product function

● I&M data

Yes; I&M0 to I&M3

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

STEP 7 V13 SP1 or higher

● STEP 7 configurable/integrated as of version

V5.5 SP4 Hotfix 7 or higher

● PROFIBUS as of GSD version/GSD revision

GSD as of Revision 5

● PROFINET as of GSD version/GSD revision

GSDML V2.3.1

Supply voltage

Load voltage 1L+

● Rated value (DC)

24V

● permissible range, lower limit (DC)

20.4V

● permissible range, upper limit (DC)

28.8V

6ES7143-5AF00-0BA0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6ES7143-5AF00-0BA0 SIMATIC ET 200AL, DIQ 4+DQ 4x 24 V DC/0.5 A, 4x M12, Degree of protection IP67 General information Product type designation DIQ 4+DQ 4x24VDC/0.5A HW functional status E01 Firmware version V1.0.x Product function ● I&M data Yes; I&M0 to I&M3 Engineering with ● STEP 7 TIA Portal configurable/integrated as of version STEP 7 V13 SP1 or higher ● STEP 7 configurable/integrated as of version V5.
PAGE 2
● Reverse polarity protection Yes; Against destruction; encoder power supply outputs applied with reversed polarity, loads pick up Load voltage 2L+ ● Rated value (DC) 24 V ● permissible range, lower limit (DC) 20.4 V ● permissible range, upper limit (DC) 28.8 V ● Reverse polarity protection Yes; against destruction; load increasing Input current Current consumption (rated value) 40 mA; without load from load voltage 1L+ (unswitched voltage) 4 A; Maximum value from load voltage 2L+, max.
PAGE 3
Number of digital outputs ● in groups of Short-circuit protection ● Response threshold, typ. Limitation of inductive shutdown voltage to 8; 4 DQ fixed, 4 DIQ parameterizable 4; 2 load groups for 4 outputs each Yes; per channel, electronic 0.7 A 2L+ (-47 V) Switching capacity of the outputs ● on lamp load, max. 5W Load resistance range ● lower limit 48 Ω ● upper limit 4 kΩ Output voltage ● for signal "1", min. L+ (-0.8 V) Output current ● for signal "1" rated value 0.
PAGE 4
● between the channels, in groups of 4; DIQ channels are isolated from DQ channels ● between the channels and backplane bus Yes ● between the channels and the power supply of the electronics No; DIQ channels are non-isolated and DQ channels are isolated from supply voltage 1L+ Isolation Isolation tested with 707 V DC (type test) Degree and class of protection IP degree of protection IP65/67 Standards, approvals, certificates Suitable for safety-related tripping of standard modules Yes; From FS01