Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7144-6KD00-0AB0 PLC add-on module

Data sheet 6ES7144-6KD00-0AB0

SIMATIC DP, ET 200ECO PN, 8 AI (4 U/I+4 RTD/TC); 8x M12,

Degree of protection IP67

General information

Vendor identification (VendorID) 002AH

Device identifier (DeviceID) 0306H

Supply voltage

Rated value (DC) 24V

Reverse polarity protection Yes

Input current

Current consumption, typ. 110mA

Encoder supply

Number of outputs 4

24 V encoder supply

● Short-circuit protection

Yes; Electronic at 1.4 A

● Output current, max.

1A

Power loss

Power loss, typ. 2.8W

6ES7144-6KD00-0AB0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6ES7144-6KD00-0AB0 SIMATIC DP, ET 200ECO PN, 8 AI (4 U/I+4 RTD/TC); 8x M12, Degree of protection IP67 General information Vendor identification (VendorID) 002AH Device identifier (DeviceID) 0306H Supply voltage Rated value (DC) 24 V Reverse polarity protection Yes Input current Current consumption, typ. 110 mA Encoder supply Number of outputs 4 24 V encoder supply ● Short-circuit protection Yes; Electronic at 1.4 A ● Output current, max. 1A Power loss Power loss, typ.
PAGE 2
Analog inputs Number of analog inputs 8 ● For voltage/current measurement 4 ● For resistance/resistance thermometer measurement 4 permissible input voltage for voltage input (destruction limit), max. 28.8 V permanent, 35 V for max.
PAGE 3
Cable length ● shielded, max. 30 m Analog value generation for the inputs Analog value display SIMATIC S7 format Measurement principle integrating Integration and conversion time/resolution per channel ● Resolution with overrange (bit including sign), max. 16 bit ● Integration time, parameterizable Yes ● Integration time (ms) 2/16.
PAGE 4
Transmission procedure 100BASE-TX Number of PROFINET interfaces 1 1. Interface Interface types ● integrated switch Yes ● M12 port Yes Interface types M12 port ● Transmission procedure 100BASE-TX ● Autonegotiation Yes ● Autocrossing Yes ● Transmission rate, max.
PAGE 5
between load voltage and all other switching components No between Ethernet and electronics Yes Potential separation channels ● between the channels No Permissible potential difference Between the inputs and MANA (UCM) 10 Vpp AC Isolation tested with ● 24 V DC circuits 707 V DC (type test) ● Test voltage for interface, rms value [Vrms] 1 500 V; According to IEEE 802.