Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCsPLC add-on module 6ES7148-6JA00-0AB0

Data sheet 6ES7148-6JA00-0AB0

SIMATIC DP, ET 200ECO PN, IO-Link master, 4IO-L+8DI+4DO 24 V

DC/1.3A 8xM12, Duplicate assignment, Degree of protection IP67

General information

Vendor identification (VendorID) 002AH

Device identifier (DeviceID) 0306H

Supply voltage

Rated value (DC) 24V

Reverse polarity protection Yes

Load voltage 2L+

● Rated value (DC)

24V

● Reverse polarity protection

Yes

Input current

Current consumption, typ. 200mA

from supply voltage 1L+, max. 4A

from load voltage 2L+, max. 4A

Encoder supply

Number of outputs 6

24 V encoder supply

6ES7148-6JA00-0AB0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6ES7148-6JA00-0AB0 SIMATIC DP, ET 200ECO PN, IO-Link master, 4IO-L+8DI+4DO 24 V DC/1.3A 8xM12, Duplicate assignment, Degree of protection IP67 General information Vendor identification (VendorID) 002AH Device identifier (DeviceID) 0306H Supply voltage Rated value (DC) 24 V Reverse polarity protection Yes Load voltage 2L+ ● Rated value (DC) 24 V ● Reverse polarity protection Yes Input current Current consumption, typ. 200 mA from supply voltage 1L+, max.
PAGE 2
● Short-circuit protection Yes ● Output current, max. 200 mA; 100 mA per output to X5-X6 Power loss Power loss, typ. 8W Digital inputs Number of digital inputs 8 Input characteristic curve in accordance with IEC 61131, type 3 Yes Number of simultaneously controllable inputs all mounting positions — up to 60 °C, max. 8 Input voltage ● Rated value (DC) 24 V ● for signal "0" -3 to +5V ● for signal "1" +11 to +30V Input current ● for signal "0", max. (permissible quiescent current) 1.
PAGE 3
● with inductive load, max. 0.5 Hz ● on lamp load, max. 1 Hz Total current of the outputs (per group) all mounting positions — up to 60 °C, max. 3.9 A Cable length ● unshielded, max. 30 m IO-Link Number of ports ● of which simultaneously controllable 4 4 IO-Link protocol 1.0 Yes Transmission rate 4.8 kBd (COM1); 38.
PAGE 4
PROFIsafe No PROFINET IO Device Services — IRT with the option "high flexibility" Yes Open IE communication ● TCP/IP No ● SNMP Yes ● DCP Yes ● LLDP Yes ● ping Yes ● ARP Yes Interrupts/diagnostics/status information Diagnostics function Yes Alarms ● Diagnostic alarm Yes Diagnostic messages ● Diagnostic information readable Yes ● Monitoring the supply voltage Yes; Green "ON" LED ● Wire-break in actuator cable Yes ● Wire-break in signal transmitter cable Yes ● Short-circuit Yes ●
PAGE 5
Weights Weight, approx.