Data Sheet

Data sheet 6ES7153-2BA10-0XB0

SIMATIC DP, Connection ET 200M IM 153-2 High Feature for max.

12 S7-300 modules with redundancy capability, Timestamping

suitable for isochronous mode New features: up to 12 modules can

be used Slave INITIATIVE for Drive ES and Switch ES Expanded

quantity structure for HART auxiliary variables Operation of the 64-

channel modules 32 signals/slot +++Observe compatibility notes in

manual+++

General information

Product type designation IM 153-2 DP HF

Firmware version V6.0.0

Vendor identification (VendorID) 801Eh

Supply voltage

Rated value (DC) 24V

● 24 V DC

Yes

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

external protection for power supply lines

(recommendation)

2,5 A

Mains buffering

● Mains/voltage failure stored energy time

5ms

Input current

Current consumption, max. 650mA; with 24 V DC supply

Inrush current, typ. 3A

I²t 0.1A²·s

Output current

6ES7153-2BA10-0XB0 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6ES7153-2BA10-0XB0 SIMATIC DP, Connection ET 200M IM 153-2 High Feature for max. 12 S7-300 modules with redundancy capability, Timestamping suitable for isochronous mode New features: up to 12 modules can be used Slave INITIATIVE for Drive ES and Switch ES Expanded quantity structure for HART auxiliary variables Operation of the 64channel modules 32 signals/slot +++Observe compatibility notes in manual+++ General information Product type designation IM 153-2 DP HF Firmware version V6.0.
PAGE 2
for backplane bus (5 V DC), max. 1.5 A Power loss Power loss, typ. 5.5 W Address area Addressing volume ● Inputs 244 byte ● Outputs 244 byte Hardware configuration Number of modules per DP slave interface, max. 12 Time stamping Accuracy 1 ms; 1ms at up to 8 modules; 10ms at up to 12 modules Number of message buffers 15 Messages per message buffer 20 Number of stampable digital inputs, max. 128; Max. 128 signals/station; max. 32 signals/slot Time format RFC 1119 Time resolution 0.
PAGE 3
Potential separation Potential separation exists Yes Isolation Isolation tested with Isolation voltage 500 V Degree and class of protection IP degree of protection IP20 Ambient conditions Ambient temperature during operation ● min. 0 °C ● max. 60 °C Altitude during operation relating to sea level ● Installation altitude above sea level, max.