Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCsPLC interface 6ES7155-5AA00-0AC0

Data sheet 6ES7155-5AA00-0AC0

SIMATIC ET 200MP. PROFINET IO device Interface module IM 155-

5 PN HF, for ET 200MP electronic modules; up to 12 IO modules

without PS; up to 30 IO modules with additional PS; Integrated 2-port

switch; RJ45 shared device; MRP; IRT >=0.25 ms; Isochronous

mode FW update; I&M0...3; prioritized startup, S2 redundancy;

shared device with 4 controllers

General information

Product type designation IM 155-5 PN HF

HW functional status FS03

Firmware version V4.2

● FW update possible

Yes

Vendor identification (VendorID) 002AH

Device identifier (DeviceID) 0X0312

Product function

● I&M data

Yes; I&M0 to I&M3

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V13 / V13

● STEP 7 configurable/integrated as of version

V5.5 SP3 / -

● PROFINET as of GSD version/GSD revision

V2.3 / -

Configuration control

via user data No

via dataset Yes

Supply voltage

6ES7155-5AA00-0AC0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6ES7155-5AA00-0AC0 SIMATIC ET 200MP. PROFINET IO device Interface module IM 1555 PN HF, for ET 200MP electronic modules; up to 12 IO modules without PS; up to 30 IO modules with additional PS; Integrated 2-port switch; RJ45 shared device; MRP; IRT >=0.25 ms; Isochronous mode FW update; I&M0...3; prioritized startup, S2 redundancy; shared device with 4 controllers General information Product type designation IM 155-5 PN HF HW functional status FS03 Firmware version V4.
PAGE 2
Rated value (DC) 24 V permissible range, lower limit (DC) 20.4 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Short-circuit protection Yes Mains buffering ● Mains/voltage failure stored energy time 5 ms Input current Current consumption (rated value) 0.2 A Current consumption, max. 1.2 A Inrush current, max. 9A I²t 0.09 A²·s Power Infeed power to the backplane bus 14 W Power available from the backplane bus 2.3 W Power loss Power loss, typ. 4.
PAGE 3
Interface types RJ 45 (Ethernet) ● Transmission procedure PROFINET with 100 Mbit/s full duplex (100BASE-TX) ● 100 Mbps Yes ● Autonegotiation Yes ● Autocrossing Yes Protocols PROFINET IO Device Services — Isochronous mode Yes — Open IE communication Yes — IRT Yes — PROFIenergy No — Prioritized startup Yes — Shared device Yes — Number of IO Controllers with shared device, max.
PAGE 4
● ERROR LED Yes; Red LED ● MAINT LED Yes; Yellow LED ● Connection display LINK TX/RX Yes; Yellow LED Potential separation between backplane bus and electronics No between PROFINET and all other circuits Yes; 1500 V AC between supply and all other circuits No Isolation Isolation tested with 707 V DC (type test) Ambient conditions Ambient temperature during operation ● horizontal installation, min. 0 °C ● horizontal installation, max. 60 °C ● vertical installation, min.