Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCsPLC add-on module 6ES7155-6AA01-0BN0

Data sheet 6ES7155-6AA01-0BN0

SIMATIC ET 200SP, PROFINET bundle IM, IM 155-6PN ST, max. 32

I/O modules and 16 ET 200AL modules, single hot swap, bundle

consists of: Interface module (6ES7155-6AU01-0BN0), Server

module (6ES7193-6PA00-0AA0), BusAdapter BA 2xRJ45 (6ES7193-

6AR00-0AA0)

General information

Product type designation IM 155-6 PN ST

HW functional status FS01

Firmware version V4.1

Product function

● I&M data

Yes; I&M0 to I&M3

● Module swapping during operation (hot

swapping)

Yes; Single hot swapping

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V14

● STEP 7 configurable/integrated as of version

V5.5 SP4 and higher

● PROFINET as of GSD version/GSD revision

V2.3 / -

Configuration control

via dataset Yes

Supply voltage

Rated value (DC) 24V

permissible range, lower limit (DC) 19.2V

6ES7155-6AA01-0BN0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6ES7155-6AA01-0BN0 SIMATIC ET 200SP, PROFINET bundle IM, IM 155-6PN ST, max. 32 I/O modules and 16 ET 200AL modules, single hot swap, bundle consists of: Interface module (6ES7155-6AU01-0BN0), Server module (6ES7193-6PA00-0AA0), BusAdapter BA 2xRJ45 (6ES71936AR00-0AA0) General information Product type designation IM 155-6 PN ST HW functional status FS01 Firmware version V4.
PAGE 2
permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Short-circuit protection Yes Mains buffering ● Mains/voltage failure stored energy time 10 ms Input current Current consumption (rated value) 450 mA Current consumption, max. 550 mA Inrush current, max. 3.7 A I²t 0.09 A²·s Power Infeed power to the backplane bus 4.5 W Power loss Power loss, typ. 1.9 W Address area Address space per module ● Address space per module, max.
PAGE 3
● 10 Mbps Yes; for Ethernet services ● 100 Mbps Yes; PROFINET with 100 Mbit/s full duplex (100BASE-TX) ● Autonegotiation Yes ● Autocrossing Yes Protocols PROFINET IO Device Services — Isochronous mode No — Open IE communication Yes — IRT Yes; with send cycles of between 250 µs and 4 ms in increments of 125 µs — PROFIenergy Yes — Prioritized startup Yes — Shared device Yes — Number of IO Controllers with shared device, max.
PAGE 4
Permissible potential difference between different circuits Safety extra low voltage SELV Isolation Isolation tested with 707 V DC (type test) Standards, approvals, certificates Network loading class 2 Security level According to Security Level 1 Test Cases V1.1.1 Ambient conditions Ambient temperature during operation ● horizontal installation, min. 0 °C ● horizontal installation, max. 60 °C ● vertical installation, min. 0 °C ● vertical installation, max.