Data Sheet

Data sheet 6ES7193-6BP20-0BB1

SIMATIC ET 200SP, BaseUnit BU20-P12+A0+4B, BU type B1,

Packing unit: 1 unit, push-in terminals, without auxiliary terminals,

bridged to the left, WxH: 20 mm x 117 mm

General information

Product type designation Type B1

HW functional status FS10 and higher

Supply voltage

Rated value (DC) See manual

● For P1 and P2 bus

24V

● For AUX bus

24V; Equal potential group to P1/P2 bus or PE

● for process terminals

24V

Rated value (AC) See manual

● For P1 and P2 bus

230V

● For AUX bus

230V; Equal potential group to P1/P2 bus or PE

● for process terminals

230V

external protection for power supply lines Yes

Mains filter

● integrated

Current carrying capacity

up to 60 °C, max. 10A

For P1 and P2 bus, max. 10A

6ES7193-6BP20-0BB1 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6ES7193-6BP20-0BB1 SIMATIC ET 200SP, BaseUnit BU20-P12+A0+4B, BU type B1, Packing unit: 1 unit, push-in terminals, without auxiliary terminals, bridged to the left, WxH: 20 mm x 117 mm General information Product type designation Type B1 HW functional status FS10 and higher Supply voltage Rated value (DC) See manual ● For P1 and P2 bus 24 V ● For AUX bus 24 V; Equal potential group to P1/P2 bus or PE ● for process terminals 24 V Rated value (AC) See manual ● For P1 and P2 bus 230
PAGE 2
For AUX bus, max. 10 A For process terminals, max. 5A Hardware configuration Automatic encoding Yes Potential separation between backplane bus and supply voltage Yes between process terminals and supply voltage Yes; Not applicable for process terminals 9 to 12 between power bus and supply voltage Yes Isolation Isolation tested with 3 100 V DC Ambient conditions Ambient temperature during operation ● horizontal installation, min. -30 °C ● horizontal installation, max.