Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7215-1AF40-0XB0 PLC compact CPU

Data sheet 6ES7215-1AF40-0XB0

SIMATIC S7-1200F, CPU 1215 FC, compact CPU, DC/DC/DC, 2

PROFINET ports, onboard I/O: 14 DI 24 V DC; 10 DO 24 V DC;

0.5A; 2 AI 0-10 V DC, 2 AO 0-20 mA DC, Power supply: DC 20.4-

28.8V DC, Program/data memory 150 KB

General information

Product type designation CPU 1215FC DC/DC/DC

Firmware version V4.2

Engineering with

● Programming package

STEP 7 V14 or higher

Supply voltage

Rated value (DC)

● 24 V DC

Yes

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

Reverse polarity protection Yes

Load voltage L+

● Rated value (DC)

24V

● permissible range, lower limit (DC)

20.4V

● permissible range, upper limit (DC)

28.8V

Input current

Current consumption (rated value) 500mA; CPU only

Current consumption, max. 1500mA; CPU with all expansion modules

6ES7215-1AF40-0XB0 Subject to change without notice

Page 1/

Summary of content (10 pages)

PAGE 1
Data sheet 6ES7215-1AF40-0XB0 SIMATIC S7-1200F, CPU 1215 FC, compact CPU, DC/DC/DC, 2 PROFINET ports, onboard I/O: 14 DI 24 V DC; 10 DO 24 V DC; 0.5A; 2 AI 0-10 V DC, 2 AO 0-20 mA DC, Power supply: DC 20.428.8V DC, Program/data memory 150 KB General information Product type designation CPU 1215FC DC/DC/DC Firmware version V4.2 Engineering with ● Programming package STEP 7 V14 or higher Supply voltage Rated value (DC) ● 24 V DC Yes permissible range, lower limit (DC) 20.
PAGE 2
Inrush current, max. 12 A; at 28.8 V DC I²t 0.5 A²·s Output current for backplane bus (5 V DC), max. 1 600 mA; Max. 5 V DC for SM and CM Encoder supply 24 V encoder supply ● 24 V L+ minus 4 V DC min. Power loss Power loss, typ. 12 W Memory Work memory ● integrated 150 kbyte ● expandable No Load memory ● integrated 4 Mbyte ● Plug-in (SIMATIC Memory Card), max.
PAGE 3
● Inputs, adjustable 1 kbyte ● Outputs, adjustable 1 kbyte Hardware configuration Number of modules per system, max. 3 comm. modules, 1 signal board, 8 signal modules Time of day Clock ● Hardware clock (real-time) Yes ● Backup time 480 h; Typical ● Deviation per day, max.
PAGE 4
● on lamp load, max. 5W Output voltage ● for signal "0", max. 0.1 V; with 10 kOhm load ● for signal "1", min. 20 V Output current ● for signal "1" rated value 0.5 A ● for signal "0" residual current, max. 0.1 mA Output delay with resistive load ● "0" to "1", max. 1 µs ● "1" to "0", max. 5 µs Switching frequency ● of the pulse outputs, with resistive load, max. 100 kHz Relay outputs ● Number of relay outputs 0 Cable length ● shielded, max. 500 m ● unshielded, max.
PAGE 5
Encoder Connectable encoders ● 2-wire sensor Yes 1. Interface Interface type PROFINET Physics Ethernet Isolated Yes automatic detection of transmission rate Yes Autonegotiation Yes Autocrossing Yes Interface types ● Number of ports 2 ● integrated switch Yes Protocols ● PROFINET IO Controller Yes ● PROFINET IO Device Yes ● SIMATIC communication Yes ● Open IE communication Yes ● Web server Yes ● Media redundancy Yes; as MRP client PROFINET IO Controller ● Transmission rate, max.
PAGE 6
— Updating time The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data. PROFINET IO Device Services — PG/OP communication Yes — S7 routing Yes — Isochronous mode No — Open IE communication Yes — IRT No — MRP Yes; as MRP client — MRPD No — PROFIenergy Yes — Shared device Yes — Number of IO Controllers with shared device, max.
PAGE 7
● as server Yes ● as client Yes ● User data per job, max. See online help (S7 communication, user data size) Number of connections ● overall 16; dynamically Test commissioning functions Status/control ● Status/control variable Yes ● Variables Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters Forcing ● Forcing Yes Diagnostic buffer ● present Yes Traces ● Number of configurable Traces 2 ● Memory size per trace, max.
PAGE 8
● between the channels, in groups of 1 EMC Interference immunity against discharge of static electricity ● Interference immunity against discharge of static electricity acc. to IEC 61000-4-2 Yes — Test voltage at air discharge 8 kV — Test voltage at contact discharge 6 kV Interference immunity to cable-borne interference ● Interference immunity on supply lines acc. to IEC 61000-4-4 Yes ● Interference immunity on signal cables acc.
PAGE 9
● horizontal installation, min. 0 °C ● horizontal installation, max. 55 °C ● vertical installation, min. 0 °C ● vertical installation, max. 45 °C Ambient temperature during storage/transportation ● min. -40 °C ● max. 70 °C Air pressure acc. to IEC 60068-2-13 ● Operation, min. 795 hPa ● Operation, max. 1 080 hPa ● Storage/transport, min. 660 hPa ● Storage/transport, max. 1 080 hPa Relative humidity ● Operation, max.
PAGE 10
Height 100 mm Depth 75 mm Weights Weight, approx.