Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7215-1HG40-0XB0 PLC CPU

Data sheet 6ES7215-1HG40-0XB0

SIMATIC S7-1200, CPU 1215C, compact CPU, DC/DC/relay, 2

PROFINET ports, onboard I/O: 14 DI 24 V DC; 10 DO relay 2 A, 2 AI

0-10 V DC, 2 AO 0-20 mA DC, Power supply: DC 20.4-28.8 V DC,

Program/data memory 125 KB

General information

Product type designation CPU 1215C DC/DC/relay

Firmware version V4.2

Engineering with

● Programming package

STEP 7 V14 or higher

Supply voltage

Rated value (DC)

● 24 V DC

Yes

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

Reverse polarity protection Yes

Load voltage L+

● Rated value (DC)

24V

● permissible range, lower limit (DC)

20.4V

● permissible range, upper limit (DC)

28.8V

Input current

Current consumption (rated value) 500mA; CPU only

Current consumption, max. 1500mA; CPU with all expansion modules

6ES7215-1HG40-0XB0 Subject to change without notice

Page 1/

Summary of content (9 pages)

PAGE 1
Data sheet 6ES7215-1HG40-0XB0 SIMATIC S7-1200, CPU 1215C, compact CPU, DC/DC/relay, 2 PROFINET ports, onboard I/O: 14 DI 24 V DC; 10 DO relay 2 A, 2 AI 0-10 V DC, 2 AO 0-20 mA DC, Power supply: DC 20.4-28.8 V DC, Program/data memory 125 KB General information Product type designation CPU 1215C DC/DC/relay Firmware version V4.2 Engineering with ● Programming package STEP 7 V14 or higher Supply voltage Rated value (DC) ● 24 V DC Yes permissible range, lower limit (DC) 20.
PAGE 2
Inrush current, max. 12 A; at 28.8 V DC I²t 0.8 A²·s Output current for backplane bus (5 V DC), max. 1 600 mA; Max. 5 V DC for SM and CM Encoder supply 24 V encoder supply ● 24 V L+ minus 4 V DC min. Power loss Power loss, typ. 12 W Memory Work memory ● integrated 125 kbyte ● expandable No Load memory ● integrated 4 Mbyte ● Plug-in (SIMATIC Memory Card), max.
PAGE 3
● Inputs, adjustable 1 kbyte ● Outputs, adjustable 1 kbyte Hardware configuration Number of modules per system, max. 3 comm. modules, 1 signal board, 8 signal modules Time of day Clock ● Hardware clock (real-time) Yes ● Backup time 480 h; Typical ● Deviation per day, max.
PAGE 4
● "0" to "1", max. 10 ms; max. ● "1" to "0", max. 10 ms; max. Relay outputs ● Number of relay outputs 10 ● Number of operating cycles, max. mechanically 10 million, at rated load voltage 100 000 Cable length ● shielded, max. 500 m ● unshielded, max. 150 m Analog inputs Number of analog inputs 2 Input ranges ● Voltage Yes Input ranges (rated values), voltages ● 0 to +10 V Yes ● Input resistance (0 to 10 V) ≥100k ohms Cable length ● shielded, max.
PAGE 5
Autocrossing Yes Interface types ● Number of ports 2 ● integrated switch Yes Protocols ● PROFINET IO Controller Yes ● PROFINET IO Device Yes ● SIMATIC communication Yes ● Open IE communication Yes ● Web server Yes ● Media redundancy Yes; as MRP client PROFINET IO Controller ● Transmission rate, max.
PAGE 6
— MRP Yes; as MRP client — MRPD No — PROFIenergy Yes — Shared device Yes — Number of IO Controllers with shared device, max. 2 Protocols Supports protocol for PROFINET IO Yes PROFIBUS Yes; CM 1243-5 (master) or CM 1242-5 (slave) required AS-Interface Yes; CM 1243-2 required Protocols (Ethernet) ● TCP/IP Yes ● DHCP No ● SNMP Yes ● DCP Yes ● LLDP Yes Open IE communication ● TCP/IP — Data length, max. ● ISO-on-TCP (RFC1006) — Data length, max. ● UDP — Data length, max.
PAGE 7
Forcing ● Forcing Yes Diagnostic buffer ● present Yes Traces ● Number of configurable Traces 2 ● Memory size per trace, max. 512 kbyte Interrupts/diagnostics/status information Diagnostics indication LED ● RUN/STOP LED Yes ● ERROR LED Yes ● MAINT LED Yes Integrated Functions Number of counters 6 Counting frequency (counter) max. 100 kHz Frequency measurement Yes controlled positioning Yes Number of position-controlled positioning axes, max.
PAGE 8
Interference immunity against voltage surge ● on the supply lines acc. to IEC 61000-4-5 Yes Interference immunity against conducted variable disturbance induced by high-frequency fields ● Interference immunity against high-frequency radiation acc. to IEC 61000-4-6 Yes Emission of radio interference acc.
PAGE 9
● Installation altitude, max. 2 000 m Relative humidity ● Operation, max. 95 %; no condensation Vibrations ● Vibration resistance during operation acc. to IEC 60068-2-6 2 g (m/s²) wall mounting, 1 g (m/s²) DIN rail ● Operation, tested according to IEC 60068-2-6 Yes Shock testing ● tested according to IEC 60068-2-27 Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms Pollutant concentrations ● SO2 at RH < 60% without condensation S02: < 0.5 ppm; H2S: < 0.