User Manual

Web server for easy Internet connectivity
9.1 Easy to use the standard Web pages
Easy Book
194 Manual, 03/2014, A5E02486774-AF
9.1
Easy to use the standard Web pages
Using the standard Web pages is easy! You only have to enable the Web server when
configuring the CPU.
The Start page displays a representation of
the CPU to which you are connected and lists
general information about the CPU.
If you log in as a user with the required
privileges, you can change the operat
ing
mode of the CPU (STOP and RUN) or flash
the LEDs.
The Variable Status page allows you to
monitor or modify any of the I/O or memory
data in your CPU. You must log in with
privileges to read data to monitor values, and
with privileges to write data to modify values.
You can enter a direct address (such as I0.0),
a PLC tag name, or a tag from a specific
program block. The data values au
tomatically
refresh until you disable the automatic refresh
option.
The Diagnostic Buffer page displays the
diagnostic buffer, and is
accessible to users
with privileges to query diagnostics. You can
select the range of diagnostic entries to be
displayed.
The diagnostic entries list the events that
occurred and the CPU time and date of when
the event occurred. Select the individual event
to display detailed information about that
event.