Datasheet

ManualsBrandsSIEMENS ManualsRack & DIN Rail Mount PSUsSIMATIC PS307 DIN Rail Power Supply 24Vdc 2A 48W, 1-Phase

Product data sheet 6ES7307-1BA01-0AA0

SIMATIC S7-300 STABILIZED POWER SUPPLY PS307

INPUT: 120/230 V AC OUTPUT: DC 24 V DC/2 A

Technical specifications

Product PS 307

Power supply, type 24 V/2 A

Input

Input 1-phase AC

Supply voltage / 1 / at AC / nominal value 120 V

Supply voltage / 2 / at AC / nominal value 230 V

Voltage range

• Note Automatic range selection

Input voltage / 1 / at AC 85 … 132 V

Input voltage / 2 / at AC 170 … 264 V

Wide-range input No

Overvoltage resistance 2.3 × Vin rated, 1.3 ms

Mains buffering at Iout rated, min. 20 ms

Mains buffering at Vin = 93/187 V

Rated line frequency 50 / 60 Hz

Rated line range 47 ... 63 Hz

Input current / at nominal level of the input voltage 120 V 0.9 A

Input current / at nominal level of the input voltage 230 V 0.5 A

Switch-on current limiting (+25 °C), max. 22 A

Duration of current limiting / at 25 °C / maximum 3 ms

6ES7307-1BA01-0AA0

Page 1/ 10/01/2012

subject to modifications

Summary of content (4 pages)

PAGE 1
Product data sheet 6ES7307-1BA01-0AA0 SIMATIC S7-300 STABILIZED POWER SUPPLY PS307 INPUT: 120/230 V AC OUTPUT: DC 24 V DC/2 A Technical specifications Product PS 307 Power supply, type 24 V/2 A Input Input 1-phase AC Supply voltage / 1 / at AC / nominal value 120 V Supply voltage / 2 / at AC / nominal value 230 V Voltage range • Note Automatic range selection Input voltage / 1 / at AC 85 … 132 V Input voltage / 2 / at AC 170 … 264 V Wide-range input No Overvoltage resistance 2.
PAGE 2
I²t, max. 1 A²·s Built-in incoming fuse T 1.6 A/250 V (not accessible) Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: 3 A, characteristic C Output Output Controlled, isolated DC voltage Rated voltage Vout DC 24 V Total tolerance, static ± 3% Static mains compensation, approx. 0.1 % Static load balancing, approx. 0.2 % Residual ripple peak-peak, max. 50 mV Residual ripple peak-peak, typ. 5 mV Spikes peak-peak, max.
PAGE 3
Current limitation 2.2 … 2.6 A Characteristic feature of the output / short-circuit protected Yes Short-circuit protection Electronic shutdown, automatic restart Enduring short circuit current / Effective level / maximum 2A Overload/short-circuit indicator - Safety Primary/secondary isolation Yes Potential separation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 Protection class Class I stray current / maximum 3.5 mA stray current / typical 0.
PAGE 4
Installation width 40 mm Mounting height 205 mm Weight, approx. 0.