Datasheet

I²t, max. 1 A²·s

Built-in incoming fuse T 1.6 A/250 V (not accessible)

Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: 3 A, characteristic C

Output

Output Controlled, isolated DC voltage

Rated voltage Vout DC 24 V

Total tolerance, static ± 3 %

Static mains compensation, approx. 0.1 %

Static load balancing, approx. 0.2 %

Residual ripple peak-peak, max. 50 mV

Residual ripple peak-peak, typ. 5 mV

Spikes peak-peak, max. (bandwidth: 20 MHz) 150 mV

Spikes peak-peak, typ. (bandwidth: 20 MHz) 20 mV

Product feature / output voltage adjustable No

Output voltage setting -

Status display Green LED for 24 V OK

On/off behavior No overshoot of Vout (soft start)

Startup delay, max. 2 s

Voltage rise, typ. 10 ms

Rated current value Iout rated 2 A

Current range 0 … 2 A

delivered active power / typ. 48 W

short-term overload current / at short-circuit during run-up / typical 9 A

Duration of overloading ability for excess current / on short-circuiting

during the start-up

90 ms

short-term overload current / at short-circuit during operation / typical 9 A

Duration of overloading ability for excess current / on short-circuiting

during the operational phase

90 ms

Parallel switching for enhanced performance Yes

Efficiency

Efficiency at Vout rated, Iout rated, approx. 84 %

Power loss at Vout rated, Iout rated, approx. 9 W

Closed-loop control

Dynamic mains compensation (Vin rated ±15 %), max. 0.1 %

Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 0.8 %

Load step setting time 50 to 100%, typ. 0.5 ms

Load step setting time 100 to 50%, typ. 0.5 ms

Setting time / maximum 1 ms

Protection and monitoring

Output overvoltage protection Additional control loop, shutdown at < 28.8 V, automatic restart

6ES7307-1BA01-0AA0

Page 2/ 10/01/2012

subject to modifications