Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7414-5HM06-0AB0 PLC CPU

Data sheet 6ES7414-5HM06-0AB0

SIMATIC S7-400H, CPU 414-5H, central processing unit for S7-

400H and S7-400F/FH, 5 interfaces: 1x MPI/DP, 1x DP, 1x PN and 2

for sync modules, 4 MB memory (2 MB data/2 MB program),

General information

Product type designation CPU 414-5H PN/DP

HW functional status 1

Firmware version V6.0

Engineering with

● Programming package

As of STEP 7 V5.5 SP2 with HF1

CiR – Configuration in RUN

CiR synchronization time, basic load 100ms

CiR synchronization time, time per I/O byte 0µs

Supply voltage

Rated value (DC)

● 24 V DC

No; Power supply via system power supply

Input current

from backplane bus 5 V DC, typ. 1.6A

from backplane bus 5 V DC, max. 1.9A

from backplane bus 24 V DC, max. 150mA; 150 mA per DP interface

from interface 5 V DC, max. 90mA; At each DP interface

6ES7414-5HM06-0AB0 Subject to change without notice

Page 1/

Summary of content (13 pages)

PAGE 1
Data sheet 6ES7414-5HM06-0AB0 SIMATIC S7-400H, CPU 414-5H, central processing unit for S7400H and S7-400F/FH, 5 interfaces: 1x MPI/DP, 1x DP, 1x PN and 2 for sync modules, 4 MB memory (2 MB data/2 MB program), General information Product type designation CPU 414-5H PN/DP HW functional status 1 Firmware version V6.0 Engineering with ● Programming package As of STEP 7 V5.
PAGE 2
Power loss Power loss, typ. 7.5 W Memory Type of memory other Work memory ● integrated 4 Mbyte ● integrated (for program) 2 Mbyte ● integrated (for data) 2 Mbyte ● expandable No Load memory ● expandable FEPROM Yes; with Memory Card (FLASH) ● expandable FEPROM, max. 64 Mbyte ● integrated RAM, max. 512 kbyte ● expandable RAM Yes ● expandable RAM, max. 64 Mbyte Backup ● present Yes ● with battery Yes; all data ● without battery No Battery Backup battery ● Backup current, typ.
PAGE 3
● Size, max. 64 kbyte ● Number, max. see instruction list ● Size, max.
PAGE 4
IEC timer ● present Yes ● Type SFB ● Number Unlimited (limited only by RAM capacity) Data areas and their retentivity retentive data area in total Total working and load memory (with backup battery) Flag ● Number, max. 8 192 byte ● Retentivity available Yes ● Retentivity preset MB 0 to MB 15 ● Number of clock memories 8; in 1 memory byte Local data ● adjustable, max.
PAGE 5
Interface modules ● Number of connectable IMs (total), max. 6 ● Number of connectable IM 460s, max. 6 ● Number of connectable IM 463s, max. 4; Single mode only Number of DP masters ● integrated 2 ● via CP 10; CP 443-5 Extended ● Mixed mode IM + CP permitted No ● via interface module 0 Number of IO Controllers ● integrated 1 ● via CP 0 Number of operable FMs and CPs (recommended) ● FM See manual Automation System S7-400H fault-tolerant systems.
PAGE 6
Time difference in system when synchronizing via ● Ethernet, max. 10 ms; Via NTP ● MPI, max. 200 ms Interfaces Number of RS 485 interfaces 2 Number of other interfaces 2; Fiber-optic interface 1. Interface Interface type Integrated Physics RS 485 / PROFIBUS + MPI Isolated Yes Power supply to interface (15 to 30 V DC), max.
PAGE 7
— Equidistance No — Isochronous mode No — SYNC/FREEZE No — Activation/deactivation of DP slaves No — Direct data exchange (slave-to-slave communication) No — DPV1 Yes Address area — Inputs, max. 2 kbyte — Outputs, max. 2 kbyte User data per DP slave — User data per DP slave, max. 244 byte — Inputs, max. 244 byte — Outputs, max. 244 byte — Slots, max. 244 — per slot, max. 128 byte PROFIBUS DP slave ● Number of connections No configuration of CPU as DP slave 2.
PAGE 8
● Point-to-point connection No PROFINET IO Controller ● Transmission rate, max. 100 Mbit/s Services — PG/OP communication Yes — S7 routing Yes — S7 communication Yes — Isochronous mode No — Open IE communication Yes — Shared device Yes; Single mode only — Prioritized startup No — Number of connectable IO Devices, max. 256; In redundant mode via both interfaces — Number of connectable IO Devices for RT, max. 256 — of which in line, max.
PAGE 9
● Number of DP slaves, max. 96 Services — PG/OP communication Yes — Routing Yes — Global data communication No — S7 basic communication No — S7 communication Yes — S7 communication, as client Yes — S7 communication, as server Yes — Equidistance No — Isochronous mode No — SYNC/FREEZE No — Activation/deactivation of DP slaves No — Direct data exchange (slave-to-slave communication) No — DPV0 Yes — DPV1 Yes Address area — Inputs, max. 6 kbyte — Outputs, max.
PAGE 10
— several passive connections per port, supported ● ISO-on-TCP (RFC1006) Yes Yes; Via integrated PROFINET interface or CP 443-1 and loadable FBs — Number of connections, max. 62 — Data length, max. 32 kbyte; 1452 bytes via CP 443-1 Adv. ● UDP Yes; via integrated PROFINET interface and loadable FBs — Number of connections, max. 62 — Data length, max.
PAGE 11
● usable for PG communication — reserved for PG communication 1 — adjustable for PG communication, max. 0 ● usable for OP communication — reserved for OP communication 1 — adjustable for OP communication, max. 0 ● usable for S7 basic communication — reserved for S7 basic communication 0 — adjustable for S7 basic communication, max. 0 ● usable for S7 communication — reserved for S7 communication 0 — adjustable for S7 communication, max.
PAGE 12
● Forcing Yes ● Forcing, variables Inputs/outputs, bit memories, distributed I/Os ● Number of variables, max. 256 Diagnostic buffer ● present Yes ● Number of entries, max. 3 200 — adjustable Yes — preset 120 Service data ● can be read out Yes EMC Emission of radio interference acc.
PAGE 13
— RDREC 8 — WRREC 8 Know-how protection ● User program protection/password protection Yes ● Block encryption Yes; With S7 block Privacy Dimensions Width 50 mm Height 290 mm Depth 219 mm Weights Weight, approx.