Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7512-1DK01-0AB0 PLC main module

Data sheet 6ES7512-1DK01-0AB0

SIMATIC DP, CPU 1512SP-1 PN for ET 200SP, Central processing

unit with Work memory 200 KB for program and 1 MB for data, 1st

interface: PROFINET IRT with 3-port switch, 48 ns bit performance,

SIMATIC Memory Card required, BusAdapter required for Port 1 and

General information

Product type designation CPU 1512SP-1 PN

HW functional status FS05

Firmware version V2.6

Product function

● I&M data

Yes; I&M0 to I&M3

● Module swapping during operation (hot

swapping)

Yes; Multi-hot swapping

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V15.1 (FW V2.6)/V13 SP1 Update 4 (FW V1.8) or higher

Configuration control

via dataset Yes

Control elements

Mode selector switch 1

Supply voltage

Type of supply voltage 24 V DC

permissible range, lower limit (DC) 19.2V

6ES7512-1DK01-0AB0 Subject to change without notice

Page 1/

Summary of content (12 pages)

PAGE 1
Data sheet 6ES7512-1DK01-0AB0 SIMATIC DP, CPU 1512SP-1 PN for ET 200SP, Central processing unit with Work memory 200 KB for program and 1 MB for data, 1st interface: PROFINET IRT with 3-port switch, 48 ns bit performance, SIMATIC Memory Card required, BusAdapter required for Port 1 and 2 General information Product type designation CPU 1512SP-1 PN HW functional status FS05 Firmware version V2.
PAGE 2
permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Mains buffering ● Mains/voltage failure stored energy time 5 ms Input current Current consumption (rated value) 0.6 A Inrush current, max. 4.7 A; Rated value I²t 0.14 A²·s Power Infeed power to the backplane bus 8.75 W Power loss Power loss, typ. 5.
PAGE 3
OB ● Size, max.
PAGE 4
● Retentivity preset No Local data ● per priority class, max. 64 kbyte; max. 16 KB per block Address area Number of IO modules 2 048; max.
PAGE 5
● Backup time 6 wk; At 40 °C ambient temperature, typically ● Deviation per day, max. 10 s; Typ.: 2 s Operating hours counter ● Number 16 Clock synchronization ● supported Yes ● to DP, master Yes; Via CM DP module ● to DP, slave Yes; Via CM DP module ● in AS, master Yes ● in AS, slave Yes ● on Ethernet via NTP Yes Interfaces Number of PROFINET interfaces 1 Number of PROFIBUS interfaces 1; Via CM DP module With optical interface Yes; via BusAdapter 1.
PAGE 6
— PROFIenergy Yes — Prioritized startup Yes; Max. 32 PROFINET devices — Number of connectable IO Devices, max. 128; In total, up to 512 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET — Of which IO devices with IRT, max. 64 — Number of connectable IO Devices for RT, max. 128 — of which in line, max. 128 — Number of IO Devices that can be simultaneously activated/deactivated, max. 8; in total across all interfaces — Number of IO Devices per tool, max.
PAGE 7
— Number of IO Controllers with shared device, max. 4 — Asset management record Yes; per user program 2. Interface Interface types ● Number of ports 1 ● RS 485 Yes; Via CM DP module Protocols ● PROFIBUS DP master Yes ● PROFIBUS DP slave Yes ● SIMATIC communication Yes Interface types RJ 45 (Ethernet) ● 100 Mbps Yes ● Autonegotiation Yes ● Autocrossing Yes ● Industrial Ethernet status LED Yes RS 485 ● Transmission rate, max.
PAGE 8
— Data length, max. ● UDP 64 kbyte Yes — Data length, max. 2 kbyte; 1 472 bytes for UDP broadcast — UDP multicast Yes; Max. 5 multicast circuits ● DHCP No ● SNMP Yes ● DCP Yes ● LLDP Yes Web server ● HTTP Yes; Standard and user pages ● HTTPS Yes; Standard and user pages PROFIBUS DP master ● Number of connections, max.
PAGE 9
— Number of simultaneous calls of the client instructions OPC_UA_ReadList,OPC_UA_WriteList and OPC_UA_MethodCall, max. 5 — Number of registerable nodes, max. 5 000 — Number of registerable method calls of OPC_UA_MethodCall, max. 100 — Number of inputs/outputs when calling OPC_UA_MethodCall, max.
PAGE 10
Number of simultaneously active program alarms ● Number of program alarms 300 ● Number of alarms for system diagnostics 100 ● Number of alarms for motion technology objects 80 Test commissioning functions Joint commission (Team Engineering) Yes; Parallel online access possible for up to 5 engineering systems Status block Yes; Up to 8 simultaneously (in total across all ES clients) Single step No Number of breakpoints 8 Status/control ● Status/control variable Yes ● Variables Inputs/outputs,
PAGE 11
— per positioning axis 80 — per synchronous axis 160 — per external encoder 80 — per output cam 20 — per cam track 160 — per probe 40 ● Positioning axis — Number of positioning axes at motion control cycle of 4 ms (typical value) 5 — Number of positioning axes at motion control cycle of 8 ms (typical value) 10 Controller ● PID_Compact Yes; Universal PID controller with integrated optimization ● PID_3Step Yes; PID controller with integrated optimization for valves ● PID-Temp Yes; PID con
PAGE 12
● Protection level: Complete protection Yes Cycle time monitoring ● lower limit adjustable minimum cycle time ● upper limit adjustable maximum cycle time Dimensions Width 100 mm Height 117 mm Depth 75 mm Weights Weight, approx.