Data Sheet

● MAINT LED
Yes
● Connection display LINK TX/RX
Yes
Supported technology objects
Motion Control Yes; Note: The number of technology objects affects the cycle
time of the PLC program; selection guide via the TIA Selection
Tool or SIZER
● Number of available Motion Control resources
for technology objects (except cam disks)
10240
● Required Motion Control resources
— per speed-controlled axis
40
— per positioning axis
80
— per synchronous axis
160
— per external encoder
80
— per output cam
20
— per cam track
160
— per probe
40
● Number of available Extended Motion Control
resources for technology objects
256
● Required Extended Motion Control resources
— for each cam
2
— for each set of kinematics
30
● Positioning axis
— Number of positioning axes at motion
control cycle of 4 ms (typical value)
70
— Number of positioning axes at motion
control cycle of 8 ms (typical value)
128
Controller
● PID_Compact
Yes; Universal PID controller with integrated optimization
● PID_3Step
Yes; PID controller with integrated optimization for valves
● PID-Temp
Yes; PID controller with integrated optimization for temperature
Counting and measuring
● High-speed counter
Yes
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.
0°C
● horizontal installation, max.
60°C; Display: 50 °C, at an operating temperature of typically 50
°C, the display is switched off
● vertical installation, min.
0°C
● vertical installation, max.
40°C; Display: 40 °C, at an operating temperature of typically 40
°C, the display is switched off
Ambient temperature during storage/transportation
● min.
-40°C
6ES7517-3TP00-0AB0 Subject to change without notice
Page 12/
13
09/13/2019 © Copyright Siemens