Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7522-1BH10-0AA0 PLC output card

Data sheet 6ES7522-1BH10-0AA0

SIMATIC S7-1500 Digital output module, DQ16x24 V DC/0.5A BA,

16 channels in groups of 8, 4 A per group; Delivery incl. front

connector Push-in

General information

HW functional status FS01

Firmware version V1.0.0

● FW update possible

Yes

Product function

● I&M data

Yes; I&M0 to I&M3

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V13 / V13

● STEP 7 configurable/integrated as of version

V5.5 SP3 / -

● PROFIBUS as of GSD version/GSD revision

V1.0 / V5.1

● PROFINET as of GSD version/GSD revision

V2.3 / -

Operating mode

● DQ

Yes

● DQ with energy-saving function

● PWM

● Oversampling

● MSO

Yes

6ES7522-1BH10-0AA0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6ES7522-1BH10-0AA0 SIMATIC S7-1500 Digital output module, DQ16x24 V DC/0.5A BA, 16 channels in groups of 8, 4 A per group; Delivery incl. front connector Push-in General information HW functional status FS01 Firmware version V1.0.0 ● FW update possible Yes Product function ● I&M data Yes; I&M0 to I&M3 Engineering with ● STEP 7 TIA Portal configurable/integrated as of version V13 / V13 ● STEP 7 configurable/integrated as of version V5.
PAGE 2
Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 20.4 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes; through internal protection with 7 A per group Input current Current consumption, max. 30 mA Output voltage Rated value (DC) 24 V Power Power available from the backplane bus 1.15 W Power loss Power loss, typ. 2.
PAGE 3
● for redundant control of a load Yes Switching frequency ● with resistive load, max. 100 Hz ● with inductive load, max. 0.5 Hz; According to IEC 60947-5-1, DC-13 ● on lamp load, max. 10 Hz Total current of the outputs ● Current per channel, max. 0.5 A; see additional description in the manual ● Current per group, max. 4 A; see additional description in the manual ● Current per module, max. 8 A; see additional description in the manual Cable length ● shielded, max. 1 000 m ● unshielded, max.
PAGE 4
Standards, approvals, certificates Suitable for safety functions No Ambient conditions Altitude during operation relating to sea level ● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual Decentralized operation Prioritized startup Yes Dimensions Width 25 mm Height 147 mm Depth 129 mm Weights Weight, approx. 230 g Other Note: Supplied incl.