Data Sheet

ManualsBrandsSiemens ManualsAutomation6ES7522-5HH00-0AB0 PLC digital ouput module

Data sheet 6ES7522-5HH00-0AB0

SIMATIC S7-1500, digital output module DQ 16x 230 V AC/2 A ST;

16 channels in groups of 2; 4 A per group; Diagnostics, substitute

value: Front connector (screw terminals or push-in) to be ordered

separately

General information

HW functional status FS01

Firmware version V1.0.0

● FW update possible

Yes

Product function

● I&M data

Yes; I&M0 to I&M3

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V13 SP1 / -

● STEP 7 configurable/integrated as of version

V5.5 SP3 / -

● PROFIBUS as of GSD version/GSD revision

V1.0 / V5.1

● PROFINET as of GSD version/GSD revision

V2.3 / -

Operating mode

● DQ

Yes

● DQ with energy-saving function

● PWM

● Oversampling

● MSO

Yes

6ES7522-5HH00-0AB0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6ES7522-5HH00-0AB0 SIMATIC S7-1500, digital output module DQ 16x 230 V AC/2 A ST; 16 channels in groups of 2; 4 A per group; Diagnostics, substitute value: Front connector (screw terminals or push-in) to be ordered separately General information HW functional status FS01 Firmware version V1.0.
PAGE 2
Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 20.4 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Input current Current consumption, max. 150 mA Output voltage Rated value (AC) 230 V; 24 V DC to 120 V DC / 24 V AC to 230 V AC Power Power available from the backplane bus 0.8 W Power loss Power loss, typ.
PAGE 3
● Current per module, max. 32 A; see additional description in the manual Relay outputs ● Number of relay outputs 16 ● Rated supply voltage of relay coil L+ (DC) 24 V ● Current consumption of relays (coil current of all relays), typ. 150 mA ● external protection for relay outputs Miniature circuit breaker B10 / B16 ● Contact connection (internal) No ● Number of operating cycles, max. see additional description in the manual ● Relay approved acc.
PAGE 4
● Between the channels and load voltage L+ Yes Permissible potential difference between different circuits 250 V AC between the channels and the supply voltage L+; 250 V AC between the channels and the backplane bus; 500 V AC between the channels Isolation Isolation tested with Between channels: 3 100 V DC; between channels backplane bus: 3 100 V DC; between L+ and backplane bus: 707 V DC (type test) Standards, approvals, certificates Suitable for safety functions No Ambient conditions Ambient tempe