Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7532-5HD00-0AB0 PLC output card

Data sheet 6ES7532-5HD00-0AB0

SIMATIC S7-1500 Analog output module AQ 4xU/I ST, 16 bit

resolution, accuracy 0.3%. 4 channels in groups of 4; Diagnostics;

Substitute value; Delivery including infeed element, shield bracket

and shield terminal: Front connector (screw terminals or push-in) to

be ordered separately

General information

Product type designation AQ 4xU/I ST

HW functional status FS04

Firmware version V2.2.0

● FW update possible

Yes

Product function

● I&M data

Yes; I&M0 to I&M3

● Output range scalable

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V12 / V12

● STEP 7 configurable/integrated as of version

V5.5 SP3 / -

● PROFIBUS as of GSD version/GSD revision

V1.0 / V5.1

● PROFINET as of GSD version/GSD revision

V2.3 / -

Operating mode

● Oversampling

● MSO

Yes

CiR – Configuration in RUN

6ES7532-5HD00-0AB0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6ES7532-5HD00-0AB0 SIMATIC S7-1500 Analog output module AQ 4xU/I ST, 16 bit resolution, accuracy 0.3%. 4 channels in groups of 4; Diagnostics; Substitute value; Delivery including infeed element, shield bracket and shield terminal: Front connector (screw terminals or push-in) to be ordered separately General information Product type designation AQ 4xU/I ST HW functional status FS04 Firmware version V2.2.
PAGE 2
Reparameterization possible in RUN Yes Calibration possible in RUN Yes Supply voltage Type of supply voltage DC Rated value (DC) 24 V permissible range, lower limit (DC) 20.4 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Input current Current consumption, max. 190 mA; with 24 V DC supply Power Power available from the backplane bus 0.6 W Power loss Power loss, typ.
PAGE 3
Analog value generation for the outputs Integration and conversion time/resolution per channel ● Resolution with overrange (bit including sign), max. 16 bit ● Conversion time (per channel) 0.5 ms Settling time ● for resistive load 1.5 ms ● for capacitive load 2.5 ms ● for inductive load 2.5 ms Errors/accuracies Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-) 0.02 % Linearity error (relative to output range), (+/-) 0.
PAGE 4
● for channel diagnostics Yes; Red LED ● for module diagnostics Yes; Red LED Potential separation Potential separation channels ● between the channels No ● between the channels, in groups of 4 ● between the channels and backplane bus Yes ● Between the channels and load voltage L+ Yes Permissible potential difference between S- and MANA (UCM) 8 V DC Isolation Isolation tested with 707 V DC (type test) Decentralized operation Prioritized startup No Dimensions Width 35 mm Height 147 mm De