Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7532-5HF00-0AB0 PLC output card

Data sheet 6ES7532-5HF00-0AB0

SIMATIC S7-1500 Analog output module AQ8xU/I HS, 16 bit

resolution, accuracy 0.3%, 8 channels in groups of 8; Diagnostics;

Substitute value 8 channels in 0.125 ms Oversampling; Delivery

including infeed element, shield bracket and shield terminal: Front

connector (screw terminals or push-in) to be ordered separately

General information

Product type designation AQ 8xU/I HS

HW functional status FS01

Firmware version V2.1.0

● FW update possible

Yes

Product function

● I&M data

Yes; I&M0 to I&M3

● Output range scalable

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V14 / -

● STEP 7 configurable/integrated as of version

V5.5 SP3 / -

● PROFIBUS as of GSD version/GSD revision

V1.0 / V5.1

● PROFINET as of GSD version/GSD revision

V2.3 / -

Operating mode

● Oversampling

Yes

● MSO

Yes

6ES7532-5HF00-0AB0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6ES7532-5HF00-0AB0 SIMATIC S7-1500 Analog output module AQ8xU/I HS, 16 bit resolution, accuracy 0.3%, 8 channels in groups of 8; Diagnostics; Substitute value 8 channels in 0.125 ms Oversampling; Delivery including infeed element, shield bracket and shield terminal: Front connector (screw terminals or push-in) to be ordered separately General information Product type designation AQ 8xU/I HS HW functional status FS01 Firmware version V2.1.
PAGE 2
CiR – Configuration in RUN Reparameterization possible in RUN Yes Calibration possible in RUN Yes Supply voltage Type of supply voltage DC Rated value (DC) 24 V permissible range, lower limit (DC) 20.4 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Input current Current consumption, max. 260 mA; with 24 V DC supply Power Power available from the backplane bus 1.15 W Power loss Power loss, typ.
PAGE 3
● shielded, max. 200 m Analog value generation for the outputs Integration and conversion time/resolution per channel ● Resolution with overrange (bit including sign), max.
PAGE 4
● ERROR LED Yes; Red LED ● Monitoring of the supply voltage (PWR-LED) Yes; Green LED ● Channel status display Yes; Green LED ● for channel diagnostics Yes; Red LED ● for module diagnostics Yes; Red LED Potential separation Potential separation channels ● between the channels No ● between the channels, in groups of 8 ● between the channels and backplane bus Yes ● Between the channels and load voltage L+ Yes Permissible potential difference between S- and MANA (UCM) 8 V DC Isolation Isolat