Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7677-2AA41-0FB0 PLC CPU

Data sheet 6ES7677-2AA41-0FB0

SIMATIC ET 200SP Open Controllers, CPU 1515SP PC. 4 GB RAM,

30 GB CFAST with WES 7 P 64 bit pre-installed, with S7-1500

software controller CPU 1505SP F pre-installed, Interfaces: 1x slot

CFAST, 1x slot SD/MMC, 1x connection for ET 200SP bus adapter

PROFINET 1x 10/100/1000 Mbit/s Ethernet, 3x USB, 1x DVI-I

graphics card connection, Documentation on DVD, Restore DVD

General information

Product type designation CPU 1515SP PC

HW functional status FS05

Firmware version V2.1

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V14 SP1

Installed software

● Visualization

● Control

S7-1500 Software Controller CPU 1505SP V2.1

Configuration control

via dataset Yes

Control elements

Mode selector switch 1

Supply voltage

Type of supply voltage 24 V DC

6ES7677-2AA41-0FB0 Subject to change without notice

Page 1/

Summary of content (11 pages)

PAGE 1
Data sheet 6ES7677-2AA41-0FB0 SIMATIC ET 200SP Open Controllers, CPU 1515SP PC. 4 GB RAM, 30 GB CFAST with WES 7 P 64 bit pre-installed, with S7-1500 software controller CPU 1505SP F pre-installed, Interfaces: 1x slot CFAST, 1x slot SD/MMC, 1x connection for ET 200SP bus adapter PROFINET 1x 10/100/1000 Mbit/s Ethernet, 3x USB, 1x DVI-I graphics card connection, Documentation on DVD, Restore DVD General information Product type designation CPU 1515SP PC HW functional status FS05 Firmware version V2.
PAGE 2
permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Mains buffering ● Mains/voltage failure stored energy time 5 ms Input current Current consumption (rated value) 1.5 A; Full processor load, incl. ET 200SP modules and using USB Current consumption (in no-load operation), typ. 0.6 A Inrush current, max. 4.7 A; Rated value Power Active power input, max. 36 W; incl.
PAGE 3
DB ● Number, max. 5 999; Number range: 1 to 65535 ● Size, max. 5 Mbyte ● Number, max. 5 998; Number range: 1 to 65535 ● Size, max. 512 kbyte ● Number, max. 5 999; Number range: 1 to 65535 ● Size, max. 512 kbyte ● Size, max.
PAGE 4
— adjustable Yes Data areas and their retentivity Retentive data area (incl. timers, counters, flags), max. 410 kbyte; For storage in NVRAM; for storage in mass storage 5 242 020 bytes Flag ● Number, max. 16 kbyte ● Number of clock memories 8; 8 clock memory bit, grouped into one clock memory byte Data blocks ● Retentivity adjustable Yes ● Retentivity preset No Local data ● per priority class, max. 64 kbyte; max.
PAGE 5
● to DP, master No ● on Ethernet via NTP Yes ● on Windows clock, slave Yes Interfaces Number of industrial Ethernet interfaces 2 Number of PROFINET interfaces 1 Number of PROFIBUS interfaces 1 Number of RS 485 interfaces 1; Via CM DP module Number of USB interfaces 3; 3x USB 2.0 on the front, 500 mA each - of which 2x 500 mA and 1x 100 mA simultaneously Number of SD card slots 1 Video interfaces ● Graphics interface 1x DVI-I 1.
PAGE 6
— Of which IO devices with IRT, max. 64 — of which in line, max. 64 — Number of connectable IO Devices for RT, max. 128 — of which in line, max. 128 — Number of IO Devices that can be simultaneously activated/deactivated, max. 8 — IO Devices changing during operation (partner ports), supported Yes — Number of IO Devices per tool, max.
PAGE 7
● RJ 45 (Ethernet) Yes; Integrated — Transmission rate, max. 1 000 Mbit/s — Industrial Ethernet status LED No 3. Interface Interface type PROFIBUS with CM DP Interface types ● RS 485 Yes Protocols ● Number of connections via this interface 44 ● PROFIBUS DP master Yes ● PROFIBUS DP slave Yes ● SIMATIC communication Yes PROFIBUS DP master ● Number of DP slaves, max.
PAGE 8
● UDP — Data length, max.
PAGE 9
● Forcing Yes ● Forcing, variables Inputs, outputs ● Number of variables, max. 200 Diagnostic buffer ● present Yes ● Number of entries, max. 1 000 — of which powerfail-proof 300 Traces ● Number of configurable Traces 4 ● Memory size per trace, max.
PAGE 10
cULus Yes FM approval Yes RCM (formerly C-TICK) Yes Ambient conditions Ambient temperature during operation ● min. 0 °C ● max. Up to 60 °C with max. 32 ET 200SP modules and 3x 100 mA USB load; up to 55 °C with max. 64 ET 200SP modules and 2x max. 500 mA and 1x max. 100 mA USB load ● horizontal installation, min. 0 °C ● horizontal installation, max. 60 °C ● vertical installation, min. 0 °C ● vertical installation, max. 50 °C; With max.
PAGE 11
● Protection level: Write protection Yes ● Protection level: Read/write protection Yes ● Protection level: Complete protection Yes Cycle time monitoring ● lower limit adjustable minimum cycle time ● upper limit adjustable maximum cycle time Open Development interfaces ● Size of ODK SO file, max. 3.8 Mbyte Peripherals/Options Peripherals ● SD card Optionally for additional mass storage Dimensions Width 160 mm Height 117 mm Depth 75 mm Weights Weight, approx. 0.