Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6ES7677-2FA41-0FM0 PLC CPU

Data sheet 6ES7677-2FA41-0FM0

SIMATIC ET 200SP Open Controllers, CPU 1515SP PC F +HMI

2048PT, 4 GB RAM, 30 GB CFAST with WES 7 P 64 bit pre-

installed, mit S7-1500 Fail-safe SWC CPU 1505SP F pre-installed

with WinCC Runtime Advanced V14 pre-installed with 2048

PowerTags license, Interfaces: 1x slot CFAST, 1x slot SD/MMC, 1x

connection for ET 200SP bus adapter PROFINET 1x 10/100/1000

Mbit/s Ethernet, 3x USB, 1x DVI-I graphics card connection,

Documentation on DVD, Restore DVD

General information

Product type designation CPU 1515SP PC F

HW functional status FS02

Firmware version V2.1

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V14 SP1

Installed software

● Visualization

WinCC Runtime Advanced V14 SP1

● Control

S7-1500 Software Controller CPU 1505SP F

Configuration control

via dataset Yes

Control elements

Mode selector switch 1

Supply voltage

Type of supply voltage 24 V DC

permissible range, lower limit (DC) 19.2V

permissible range, upper limit (DC) 28.8V

6ES7677-2FA41-0FM0 Subject to change without notice

Page 1/

Summary of content (11 pages)

PAGE 1
Data sheet 6ES7677-2FA41-0FM0 SIMATIC ET 200SP Open Controllers, CPU 1515SP PC F +HMI 2048PT, 4 GB RAM, 30 GB CFAST with WES 7 P 64 bit preinstalled, mit S7-1500 Fail-safe SWC CPU 1505SP F pre-installed with WinCC Runtime Advanced V14 pre-installed with 2048 PowerTags license, Interfaces: 1x slot CFAST, 1x slot SD/MMC, 1x connection for ET 200SP bus adapter PROFINET 1x 10/100/1000 Mbit/s Ethernet, 3x USB, 1x DVI-I graphics card connection, Documentation on DVD, Restore DVD General information Product type
PAGE 2
Reverse polarity protection Yes Mains buffering ● Mains/voltage failure stored energy time 5 ms Input current Current consumption (rated value) 1.5 A; Full processor load, incl. ET 200SP modules and using USB Current consumption (in no-load operation), typ. 0.6 A Inrush current, max. 4.7 A; Rated value Power Active power input, max. 36 W; incl. ET 200SP modules and using USB Infeed power to the backplane bus 8.75 W Power loss Power loss, typ.
PAGE 3
● Size, max. 5 Mbyte ● Number, max. 5 998; Number range: 1 to 65535 ● Size, max. 512 kbyte ● Number, max. 5 999; Number range: 1 to 65535 ● Size, max. 512 kbyte ● Size, max.
PAGE 4
Retentive data area (incl. timers, counters, flags), max. 410 kbyte; For storage in NVRAM; for storage in mass storage 5 242 020 bytes Flag ● Number, max. 16 kbyte ● Number of clock memories 8; 8 clock memory bit, grouped into one clock memory byte Data blocks ● Retentivity adjustable Yes ● Retentivity preset No Local data ● per priority class, max. 64 kbyte; max.
PAGE 5
● on Windows clock, slave Yes Interfaces Number of industrial Ethernet interfaces 2 Number of PROFINET interfaces 1 Number of PROFIBUS interfaces 1 Number of RS 485 interfaces 1; Via CM DP module Number of USB interfaces 3; 3x USB 2.0 on the front, 500 mA each - of which 2x 500 mA and 1x 100 mA simultaneously Number of SD card slots 1 Video interfaces ● Graphics interface 1x DVI-I 1.
PAGE 6
— Number of connectable IO Devices for RT, max. 128 — of which in line, max. 128 — Number of IO Devices that can be simultaneously activated/deactivated, max. 8 — IO Devices changing during operation (partner ports), supported Yes — Number of IO Devices per tool, max.
PAGE 7
— Industrial Ethernet status LED No 3. Interface Interface type PROFIBUS with CM DP Interface types ● RS 485 Yes Protocols ● Number of connections via this interface 44 ● PROFIBUS DP master Yes ● PROFIBUS DP slave Yes ● SIMATIC communication Yes PROFIBUS DP master ● Number of DP slaves, max. 125 Services — Equidistance No — Isochronous mode No PROFIBUS DP slave Services — Equidistance No — Isochronous mode No Interface types RS 485 ● Transmission rate, max.
PAGE 8
● SNMP Yes ● DCP Yes ● LLDP Yes Web server ● HTTP Yes; Via Windows and PROFINET interface ● HTTPS Yes; Only via PROFINET interface OPC UA ● OPC UA server Yes; Data access (read, write, subscribe), runtime license required — Application authentication Yes; Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 — Security policies Yes; Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 — User authentication Yes; "anonymous" or by user name
PAGE 9
● Number of variables, max. 200 Diagnostic buffer ● present Yes ● Number of entries, max. 1 000 — of which powerfail-proof 300 Traces ● Number of configurable Traces 4 ● Memory size per trace, max.
PAGE 10
RCM (formerly C-TICK) Yes Highest safety class achievable in safety mode ● Performance level according to ISO 13849-1 PLe ● SIL acc. to IEC 61508 SIL 3 Probability of failure (for service life of 20 years and repair time of 100 hours) — Low demand mode: PFDavg in accordance with SIL3 < 2.00E-05 — High demand/continuous mode: PFH in accordance with SIL3 < 1.00E-09 1/h Ambient conditions Ambient temperature during operation ● min. 0 °C ● max. Up to 60 °C with max.
PAGE 11
— GRAPH Yes Know-how protection ● User program protection/password protection Yes ● Copy protection Yes ● Block protection Yes Access protection ● Protection level: Write protection Yes ● Protection level: Read/write protection Yes ● Protection level: Complete protection Yes Cycle time monitoring ● lower limit adjustable minimum cycle time ● upper limit adjustable maximum cycle time Open Development interfaces ● Size of ODK SO file, max. 3.