Data Sheet

Manufacturer's article number / of device connector /
usable
replacement for S7-1500 40 pole
number of the plug contacts / of the electrical
connection
1
Type of electrical connection / for connecting cable Plug-in connection
Number of poles / at the 1st interface 16; the IDC connector for the connection cable
Position / of the terminal at the top
Type of electrical connection / for power supply Screw-type terminal
Number of terminals 4; 2 x 1 x L+, 2 x 1 x M
Width of screwdriver blade 3.5mm
Tightening torque / with screw-type terminals 0.4...0.7N·m
Product component / required / connection plate No
Number of cables / per connection 2; Connection for internal system: Combination of 1 or 2 Wires
until the sum total of cross sections be achieved in a ferrule.
(stripped length) 10mm
Type of connectable conductor cross-sections / solid No
Connectable conductor cross-section
● for flexible conductor / with core end processing
0.25...1.5mm²; End sleeve according to DIN 46228/1 or DIN
46228/4 with plastic collar max. 0.75 mm2
● stranded
0.5...2.5mm²
● finely stranded / without core end processing
0.5...2.5mm²
● finely stranded / with core end processing
0.25...1.5mm²
Type of wire end sleeve
● without plastic sleeve / acc. to DIN 46228-1
Length 10mm
● with plastic sleeve / acc. to DIN 46228-4
Length 10mm
Outer diameter / of the wire insulation 3.1mm; to the connection of the supply terminal
Wire length / maximum 30m; between front connector module and terminal module
General data
(mounting type) direct mounting
Degree of pollution 2
Overvoltage category 2
Design tested acc. to type of protection / EEx e No
Certificate of suitability / cULus approval Yes
Reference code / acc. to DIN EN 81346-2 X
Material / of the insulating body other
Color / of the enclosure black
Product feature / transparent No
(net weight) 0.099kg
last modified:
06/12/2019
6ES7921-5AD00-0AA0 Subject to change without notice
Page 2/
2
06/12/2019 © Copyright Siemens