Data Sheet

Data sheet 6FB1112-0AT20-3PS0

SIDOOR NT40 Switched-mode power supply, Input voltage: 230V

AC (+-15%), 50/60 Hz, Output voltage: 36VDC, IP54, incl. line cable

with Safety plug (CEE 7/4) of the Length 2 m, incl. connecting cable

to Control device of length 1.5 m, -20 to +55 °C

General information

Product type designation NT40

Installation type/mounting

Mounting type Four 5 mm screws

Supply voltage

Rated value (AC) 230V

relative symmetrical tolerance of the supply voltage 15%

Line frequency

● permissible range, lower limit

47Hz

● permissible range, upper limit

63Hz

Input current

Current consumption for 2 s, max. 3.5A

Rated value at 230 V AC 0.7A

Operational current of fuse protection at input, min. 6A

Operational current of fuse protection at input, max. 10A

6FB1112-0AT20-3PS0 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6FB1112-0AT20-3PS0 SIDOOR NT40 Switched-mode power supply, Input voltage: 230V AC (+-15%), 50/60 Hz, Output voltage: 36VDC, IP54, incl. line cable with Safety plug (CEE 7/4) of the Length 2 m, incl. connecting cable to Control device of length 1.
PAGE 2
Tripping characteristic class of fuse protection at input B Output voltage Rated value (DC) 36 V; SELV Relative symmetrical tolerance of the output voltage 3% Output current Current output (rated value) 2.5 A Temporary overload current (for 2 s maximum) 15 A Power Active power input, max. 100 W Emitted active power, max. 100 W Emitted active power (restricted to 2 s) 540 W Efficiency at 230 V AC (with 100 W emitted active power) 90 % Active apparent power, max.
PAGE 3
● No condensation, min. 10 % ● No condensation, max. 93 % Cables Cable length ● Input side 2m ● Output side 1.5 m Connection method Design of electrical connection at input SCHUKO connector DIN 49.