Data Sheet

ManualsBrandsSIEMENS ManualsNetwork Routers & SwitchesSCALANCE X201-3P IRT Industrial Ethernet switch

Data sheet 6GK5201-3BH00-2BA3

SCALANCE X201-3PIRT managed IE IRT switch, 1x 10/100 Mbit/s

RJ45 ports, 3x 100 Mbit/s POF SC RJ ports, Error signaling contact

with set button, Redundant power supply, PROFINET IO device,

network management, Redundancy Manager integrated, incl.

electron. manual on CD-ROM, C-plug optional

Product type designation SCALANCEX201-3P IRT

Transmission rate

Transfer rate 10Mbit/s,100Mbit/s

Interfaces / for communication / integrated

Number of electrical connections

● for network components or terminal equipment

number of 100 Mbit/s SC-RJ-ports / for POF FOC

● with push-pull connection system

Interfaces / others

Number of electrical connections

● for signaling contact

● for power supply

● for redundant voltage supply

Type of electrical connection

● for signaling contact

2-pole terminal block

● for power supply

4-pole terminal block

design of the removable storage

● C-PLUG

Yes

6GK5201-3BH00-2BA3 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6GK5201-3BH00-2BA3 SCALANCE X201-3PIRT managed IE IRT switch, 1x 10/100 Mbit/s RJ45 ports, 3x 100 Mbit/s POF SC RJ ports, Error signaling contact with set button, Redundant power supply, PROFINET IO device, network management, Redundancy Manager integrated, incl. electron.
PAGE 2
Signal-Inputs/outputs Operating voltage / of the signaling contacts ● at DC / Rated value 24 V Operating current / of the signaling contacts ● at DC / maximum 0.1 A Supply voltage, current consumption, power loss Type of voltage / of the supply voltage DC Supply voltage ● external 24 V ● external / minimum 18 V ● external / maximum 32 V Product component / fusing at power supply input Yes Fuse protection type / at input for supply voltage 1.1 A / 33 V Consumed current / maximum 0.
PAGE 3
Product functions / management, configuration Product function ● CLI Yes ● web-based management Yes ● MIB support Yes ● TRAPs via email Yes ● Configuration with STEP 7 Yes ● Port mirroring No ● multiport mirroring No ● with IRT / PROFINET IO switch Yes ● PROFINET IO diagnosis Yes PROFINET conformity class C Product function / switch-managed Yes Protocol / is supported ● Telnet Yes ● HTTP Yes ● HTTPS Yes ● TFTP Yes ● FTP Yes ● BOOTP No ● DCP Yes ● LLDP Yes ● SNMP v1 Yes
PAGE 4
● Ring redundancy Yes ● High Speed Redundancy Protocol (HRP) Yes ● high speed redundancy protocol (HRP) with redundancy manager Yes ● high speed redundancy protocol (HRP) with standby redundancy Yes Protocol / is supported / Media Redundancy Protocol (MRP) Yes Product function ● media redundancy protocol (MRP) with redundancy manager Yes ● Media Redundancy Protocol for Planned Duplication (MRPD) Yes ● Parallel Redundancy Protocol (PRP)/operation in the PRP-network Yes ● Parallel Redundancy P
PAGE 5
● C-Tick Yes ● Railway application in accordance with EN 50155 No ● Railway application in accordance with EN 50124-1 No ● KC approval Yes Standards, specifications, approvals / product conformity MTBF 78.03 y Accessories Product extension / optional / C-PLUG Yes Further Information / Internet Links Internet-Link ● to website: Selector SIMATIC NET SELECTION TOOL http://www.siemens.com/snst ● to website: Industrial communication http://www.siemens.