Datasheet

ManualsBrandsSiemens ManualsAutomationEthernet Switch, RJ45 Ports 6, Fibre Ports 2SC, 100Mbps, Layer 2 Managed

Data sheet 6GK5206-2BD00-2AC2

SCALANCE XC206-2 manageable layer 2 IE Switch; 6x 10/100

Mbit/s RJ45 ports; 2x 100 Mbit/s SC ports; 1x console port;

Diagnostic LED; Redundant power supply; Temp. range -40°C to +70

°C Mounting: Standard Mounting Rail/S7 Profile Rail/Wall;

redundancy functions; office features (RSTP, VLAN ,...); PROFINET

IO device Ethernet/IP-compliant C-PLUG shaft

Product type designation SCALANCEXC206-2

Transmission rate

Transfer rate 10Mbit/s,100Mbit/s

Interfaces / for communication / integrated

Number of electrical connections

● for network components or terminal equipment

6; RJ45

Number of 10/100 Mbit/s RJ45 ports / Integrated

● with securing collar

Number of 100 Mbit/s SC ports

● for multimode

Interfaces / others

Number of electrical connections

● for operator console

● for signaling contact

● for power supply

● for redundant voltage supply

Type of electrical connection

● for operator console

RJ11

6GK5206-2BD00-2AC2 Subject to change without notice

Page 1/

Summary of content (7 pages)

PAGE 1
Data sheet 6GK5206-2BD00-2AC2 SCALANCE XC206-2 manageable layer 2 IE Switch; 6x 10/100 Mbit/s RJ45 ports; 2x 100 Mbit/s SC ports; 1x console port; Diagnostic LED; Redundant power supply; Temp. range -40°C to +70 °C Mounting: Standard Mounting Rail/S7 Profile Rail/Wall; redundancy functions; office features (RSTP, VLAN ,...
PAGE 2
● for signaling contact 2-pole terminal block ● for power supply 4-pole terminal block design of the removable storage ● C-PLUG Yes Signal-Inputs/outputs Operating voltage / of the signaling contacts ● at DC / Rated value 24 V Operating current / of the signaling contacts ● at DC / maximum 0.1 A Supply voltage, current consumption, power loss Type of voltage / of the supply voltage DC Supply voltage ● external 24 V ● external / minimum 9.6 V ● external / maximum 31.
PAGE 3
● wall mounting Yes ● S7-300 rail mounting Yes ● S7-1500 rail mounting Yes Product properties, functions, components / general Cascading in the case of a redundant ring / at reconfiguration time of <\~0.3\~s 50 Cascading in cases of star topology any (depending only on signal propagation time) Product function / QoS according to DSCP Yes Product feature ● Cut Through switching method No ● Store & Forward switching method Yes Product functions / management, configuration Product function ● CL
PAGE 4
Identification & maintenance function ● I&M0 - device-specific information Yes ● I&M1 – higher-level designation/location designation Yes Product functions / Diagnosis Product function ● Port diagnostics Yes ● Statistics Packet Size Yes ● Statistics packet type Yes ● Error statistics Yes ● SysLog Yes Product functions / VLAN Product function ● VLAN - port based Yes ● VLAN - protocol-based No ● VLAN - IP-based No ● VLAN dynamic Yes Number of VLANs / maximum 257 Number of VLANs - dynam
PAGE 5
● redundancy procedure RSTP Yes ● redundancy procedure MSTP Yes ● Parallel Redundancy Protocol (PRP)/operation in the PRP-network Yes ● Parallel Redundancy Protocol (PRP)/Redundant Network Access (RNA) No ● Passive listening Yes Protocol / is supported ● LACP Yes Product functions / Security Product function ● IEEE 802.
PAGE 6
● for cULus HazLoc / as marking CL1, DIV2, Group A,B,C,D T4, CL1, Zone 2, Group IIC, T4 ● for cULus HazLoc / as File Nr.
PAGE 7
Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates.