User Manual
Programming LOGO!
3.8 Configuring additional functions for LOGO!
LOGO!
108 Manual, 06/2014, A5E33039675
5. Move the cursor to "③": Press or
6. Confirm "
③": Press
OK
.
LOGO! clears all error messages and displays as follows:
Diagnosing a specific IP address
You can check the availability of a specific IP address by following these steps:
1. In the diagnostics menu shown below, move the cursor to "
①": Press or
2. Confirm "
①": Press
OK
3. Move the cursor to "
②": Press or
4. Confirm "
②": Press
OK
. LOGO! displays the following view: