User Manual

Getting started with LOGO!
LOGO!
Manual, 06/2014, A5E33039675
15
It's your choice
The various LOGO! Base Modules, expansion modules, LOGO! TDE and communications
modules offer you a highly flexible and adaptive system to suit your specific tasks.
The LOGO! system offers you many solutions for small domestic installations, simple
automation tasks, and even complex engineering tasks involving its integration into a bus
system.
Note
You can only use expansion modules of the same voltage as the LOGO! Base Module.
Mechanical encoding pins in the housing prevent you from connecting devices of a different
voltage class.
Exception: The interface on the left side of an analog module or comm
unications module is
galvanically isolated. These types of expansion modules can therefore be connected to
devices of a
different voltage class (Page 30).
A LOGO!
TDE has two Ethernet interfaces. You can connect each interface to a Base
Module, a PC, or another LOGO! TDE.
Each LOGO!
Base Module supports the following connections for the creation of the circuit
program, regardless of the number of co
nnected modules:
•
Digital inputs I1 to I24
•
Analog inputs AI1 to AI8
•
Digital outputs Q1 to Q20
•
Analog outputs AQ1 to AQ8
•
Digital flag blocks M1 to M64:
– M8: Startup flag
– M25: Backlight flag: LOGO! onboard display white
– M26: Backlight flag: LOGO! TDE white
– M27: Message text character set flag
– M28: Backlight flag: LOGO! onboard display amber
– M29: Backlight flag: LOGO! onboard display red
– M30: Backlight flag: LOGO! TDE amber
– M31: Backlight flag: LOGO! TDE red
•
Analog flag blocks: AM1 to AM64
•
Shift register bits: S1.1 to S4.8 (32 shift register bits)
•
4 cursor keys
•
Blank outputs: X1 to X64
LOGO! 0BA8 additionally supports the display of the following network digital/analog inputs
and outputs if you have previously configured them in the circuit program in LOGO!Soft
C
omfort V8.0 and downloaded the program to the 0BA8 device:
•
64 network digital inputs: NI1 to NI64
•
32 network analog inputs: NAI1 to NAI32
•
64 network digital outputs: NQ1 to NQ64
•
16 network analog outputs: NAQ1 to NAQ16