User Manual

LOGO! functions
4.4 Special functions list - SF
LOGO!
208 Manual, 06/2014, A5E33039675
Bar graphs can be either horizontal or vertical representations of the current or actual value
scaled between the minimum and maximum value. For more information on configuring and
displaying bar graphs in message texts, refer to the Online Help for LOGO!Soft Comfort.
Editing message texts
You can only edit simple message texts from LOGO! Basic. You cannot edit message texts
that contain features such as bar graphs, I/O status names, and others from LOGO! Basic.
You can only edit these types of message texts from LOGO!Soft Comfort.
Also, you
cannot
edit message texts from LOGO! Basic that contain any of the following
parameters:
● Par
● Time
● Date
● EnTime
● EnDate
● Analog input
● Digital I/O status
● Special characters (for example: ±, €)
You can only edit such message texts from LOGO!Soft Comfort.
Changing parameters in the active message text
When the message text is active, press
ESC
to select the editing mode.
Note
You must keep the ESC
key pressed for at least one second.
Press and to select the relevant parameter. Press
OK
to change the parameter. Use the
and keys to edit a parameter.
Confirm your changes with
OK
. You can now edit further parameters in the message text (if
any exist). Press
ESC
to exit editing mode.
Key input simulation in the active message text
You can enable the four cursor keys C , C , C and C in an active message text by
pressing
ESC
plus the relevant cursor key.