User Manual

Getting started with LOGO!
LOGO!
Manual, 06/2014, A5E33039675
23
Certification and approvals
LOGO! is certified to cULus and cFMus.
● cULus Haz. Loc.
Underwriters Laboratories Inc. (UL) to
- UL 508 (Industrial Control Equipment)
- CSA C22.2 No. 142 (Process Control Equipment)
- UL 1604 (Hazardous Location)
- CSA-213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx
Class I, Zone 2, Group IIC Tx
● FM Approval (US Approval and Canada Approval)
Factory Mutual Research (FM) to
- Approval Standard Class Number 3611, 3600, 3810
- CSA C22.2 No. 213
- CSA C22.2 No. 1010-1
APPROVED for use in
- Class I, Division 2, Group A, B, C, D Tx
- Class I, Zone 2, Group IIC Tx
Note
You will find current approvals on the rating plate of the relevant module.
LOGO! is issued with the CE Certificate of Conformity. It is compliant with IEC 60730-1 and
IEC 61131-2 and interference-proof to EN 55011, Limit Class B.
Marine certification has been requested.
● ABS (American Bureau of Shipping)
● BV (Bureau Veritas)
● DNV (Det Norske Veritas)
● GL (Germanischer Lloyd)
● LRS (Lloyds Register of Shipping)
● Class NK (Nippon Kaiji Kyokai)
LOGO! modules are therefore suitable for use in industrial and residential areas. Use in
Class I, Division 2, Group A, B, C and D locations or in non-hazardous locations is
supported.
ID for Australia
Our products carrying the label shown at the side are compliant with AS/NZS
2064:1997 (Class A) standard.