User Manual

Web server
5.3 Viewing LOGO! system information
LOGO!
242 Manual, 06/2014, A5E33039675
6. Click or tap "②" to log on to the Web server.
Note
•
For remote access, the logon may take several seconds.
•
If your logon fails, press or tap the refresh button on your browser (or press the
keyboard shortcut "F5" on the conventional PC) to try it again.
5.3
Viewing LOGO! system information
Once logged in, the LOGO! Web server displays all the system information of the LOGO!
Base Module including module generation, module type, firmware (FW) version, IP address,
and module status.
Note
The firmware verison in the screen above is listed for example, your LOGO! device may be
of an later version.